Datasheet

command quick reference
UART mode
Command Default stateFunction
All commands are ASCII strings or single ASCII characters.
change baud rate 9,600Baud
pg. 28
enable/disable continuous mode enabledC
pg. 17
performs calibration
n/aCal
pg. 20
finds device with blinking white LED n/aFind
pg. 16
enable factory reset
n/a
Factory
pg. 30
device information n/ai
pg. 24
enable/disable LED enabledL
pg. 15
enable/disable internal temperature disabledO
pg. 22
enable/disable protocol lock n/aPlock
pg. 29
set/show name of device not setName
pg. 23
retrieve Status Information n/aStatus
pg. 26
returns a single reading n/aR
pg. 18
Temperature compensation
n/a
T pg. 21
enable/disable response codes n/a*OK pg. 25
enable/disable alarm n/aAlarm
pg. 19
enter sleep mode/low power n/aSleep
pg. 27
r 0.1
change to I
2
C mode not setI2C
pg. 31