Datasheet

During shipment the air bubble in the probes stem may move into the bulb area.

If bubbles are seen in the bulb area, hold the probe by its top cap and shake

downward as done with a clinical thermometer.

Helpful operating tips

To remove the soaker bottle from the probe, hold the soaker bottle by the cap and

turn the bottle until it separates from the cap; Then slide the cap off.

pH probes must stay wet and cannot be allowed to dry out, this is why every pH

probe is shipped in a plastic soaker bottle containing pH probe storage solution. The

probe should remain in the bottle until it is used. If the probe is used infrequently, the

bottle and its solution should be saved and the probe stored inside.

Ready to use

Bubbles