Datasheet

How to add more electrolyte solution
During usage, a small amount of electrolyte solution within the dissolved oxygen probe
will deplete. In this case, you will need to add more solution into the probe.
To add more electrolyte solution: Carefully unscrew the probes membrane cap, and
drain any remaining electrolyte solution. Using the supplied syringe, inject solution into
the membrane cap until it's filled to the top. Screw membrane cap back onto probe.
Once the probe is reassembled, rinse of the probe.
1
Rinse
probe
Dissolved Oxygen
Electrolyte Solution
30ml
Fill to top
2 3 4 5 6 7
UNSCREW DO NOT
PULL APART