Datasheet

Extending the probe cable length

You can extend the cable to greater than 100 meters with no loss of signal. Atlas Scientiﬁc

has tested up to 300 meters without a problem, however you run the risk of turning your

temperature probe into an antennae, picking up noise along the length of your cable.

If you want to extend your cable, we recommend that you use proper isolation, such as

the Basic EZO

Inline Voltage Isolator, or the Electrically Isolated EZO™ Carrier

Board. Be sure to calibrate your probe with the extended cable.

Extending a probe cable can be easily done with our SMA Extension Cables. Simply

connect the SMA end of the probe to the Extension cable, and you are all set.

If you need to water proof a SMA connection, we highly recommend using a product like

Coax-Seal to safely cover and prevent any water damage that may occur.

Water proof