Data Sheet
Settings that are retained if power is cut
Baud rate
Calibration
Continuous mode
Device name
Enable/disable parameters
Enable/disable response codes
Hardware switch to I
2
C mode
LED control
Protocol lock
Software switch to I
2
C mode
Find
Pressure compensation
Salinity compensation
Sleep mode
Temperature compensation
Settings that are NOT retained if power is cut
Find
Find
<cr>
LED rapidly blinks white, used to help nd device*
Command syntax
<cr>
<cr>
*OKFind
Example Response
r 0.1
This command will disable continuous mode
Send any character or command to terminate nd.
*This command is only available for
rmware version 2.10 and above.
21 Copyright © Atlas Scientic LLC