Instructions / Assembly

Figure 3
Figure 4
5
4. Connect the neutral fan wire to the
household neutral wire. (Fig. 3)
5A. Single Circuit Connection Oscillation
and fan motor action are not separate.
Connect the black, hot fan blade motor wire to
the blue, hot oscillating motor wire. Attach
these two wires to the hot, household supply
wire. (Fig. 3)
5B. Two/Dual Circuit Connection Oscillation
motor can be regulated apart from fan motor.
Connect the black, hot fan blade motor wire to
a hot, household supply wire. Connect the
blue, hot oscillating motor wire to the second
hot, household supply wire. (Fig. 3)
6. Connect the green, fan ground wire to the
household ground wire.
7. After connecting the wires, spread them
apart so that the green, ground and neutral,
white wires are on one side of the outlet box
and the hot, black and blue wires are on the
other side of the outlet box.
8. Attach fan/hanger bracket wall junction box
using hardware provided. Tighten screws well.
(Fig. 4)
9. Push canopy down goose neck toward wall
until the canopy lays flat against the wall
surface, covering junction box and mounting
plate. Tighten set screws in canopy. (Fig. 4)
SUPPLY CIRCUIT
OUTLET BOX
Neutral
Black/WH t
o Hot
Hot
Ground Ground
White/Neutral
Green/Ground
Blue/Hot
Blue/Hot
Black/Hot
Black/Hot
Set screws
Screws