Owner`s manual

AtlasSound.com – 6 –
Specifications are subject to change without notice.
Owner’s Manual
F6-MF
Multi-Impedance Modular Amplifier
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: [phone] • Fax: [phone]
Key Features
 • Supportsupto6AmplifierChannels
 • LightWeightPowerRailDirectCoupling™(PRDC)Technology
 • Ultra-EfficientClassDAmplificationTopology
 • UltraFastRecoverySwitchModePowerSupply
 • ModularDesign,PurchasetheNumberofChannelsNeeded
 • EnergySaveMode,RemoteActivation
 • 4Ω/8ΩAmplifierPowerModules
 • 70.7VAmplifierPowerModules
 • BalancedInputsviaPhoenixConnector
 • FrontandRearLEDStatusIndicators
 • OptionalGainSelections
 • SelectableHi-PassFilterperChannel
 • Tamper-ResistantLevelControls
 • IndividualChannelProtection
 • OptionalInputModules,DSPSignalProcessingandAnalogMixer
Applications
The Atlas Sound F6-MF Multi-Impedance Modular Amplifier can be used for a number of applications. Due to its modular design,
theF6-MFisidealforaddressingtoday'ssystemneedsaswellasfuturesystemexpansion;includingbutnotlimitedtoboardroom,
restaurant,commercialpaging,andbackgroundmusicapplications.EachamplifiercardslotoftheF6-MFcanaccepteithera4Ω/8Ωor
70.7Vamplifiermodulecard,enablingcompletesystemdesignflexibility,makingittheidealmulti-facetedamplifier.
The F6-MF Multi-Impedance Modular Amplifier can be used in a single-channel or multi-channel amplifier configuration. The superior
sonicqualityallowstheF6-MFtobeusedinahighendsurroundsystemwhilethe70.7VamplifiermodulesallowtheF6-MFtoideally
perform when paging into a multi-zone configuration. The F6-MF can also function in cross-application settings such as restaurants
and night clubs. Channels can operate independently of one another, allowing for example, one or two channels to be designated for
backgroundpagingwhiletheremainingchannelscanbeusedwiththenightclub'sdancefloorsystem.
Eachchannelitselfcanproduce250wattsat4Ωor70.7Vat0.15%THD.Whenallchannelsaredrivenwithasinewavesimultaneously
tofullpower,continuousoutputis170Wattsat4Ωor170Wattsinto70.7V.BecauseofthePRDCtechnologyunderreallifeaudio
power requirements, the F6-MF can deliver over 250 Watts dynamic power all channels driven. Refer to the specification page for full
details.