Owner`s manual

OWNER’S MANUAL
AtlasSound.com
1601 JACK MCKAY BLVD. • ENNIS, TEXAS 75119 U.S.A.
TELEPHONE: [phone] • FAX [phone]
©2008 Atlas Sound LP. All rights reserved.
Atlas Sound is a trademark of Atlas Sound LP. Printed in China.
ATS003211 RevA 8/08 13
Specifications are subject to change without notice
ECS-3
Installation
Before installing we strongly suggest you read the entire manual to ensure you benefit
from all the features of the ECS-3. The ECS-3 can be placed on a shelf or rack mounted in a
standard 19" width rack. Placement within a rack is not critical but the rack should be within
6' of dedicated 15A AC outlet. Always make sure the 15A outlet is properly inspected by a
certified electrician prior to connecting the ECS-3. Below are a few installation tips.
• AfterpluggingtheECS-3intoa15AACMainsoutletinspecttheWiringFaultLEDfor
illumination. The LED should not be on.
• InspecttheequipmentthatistobepluggedintotheECS-3toensureitdoesnotexceed
15A total amperage draw.
• Dividetheequipmentintothreecategories.Picktheoutletsthatmatchtheoutlets
equipment use.