Owner`s manual

AtlasSound.com – 4 –
Specifications are subject to change without notice.
Owner’s Manual
ECM-15SH
AC
Power Conditioner & Suppression Module
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: [phone] • Fax: [phone]
CAUTION – When Installing the Product
• Plugging in or unplugging the power cord with wet hands may result in electric shock.
• Nevermovetheunitwiththepowercordpluggedintothewall,asdamagetothepowercordmayresult.
• Whenunpluggingthecordfromthewall,grasptheplug,NOTthecord.
• Neverinstallthisproductinhumidordustylocations,norindirectsunlight,nearsourcesofheat,orinareaswheresootysmokeor
steam are present. Fire and electric shock may result.
• Keep all sides of the unit at least 3
1
⁄2" away from objects that may obstruct air flow to prevent the unit's internal temperature rise.
WARNING – When the Device is in Use
• To prevent electric shock, do not remove the product cover as there are high voltage components inside. Refer all servicing to Atlas
Sound.
• Should any of the following irregularities occur during use, immediately switch off the power, disconnect the power cord from
the AC outlet and contact Atlas Sound. Do not to attempt to continue operation with the product as this may cause fire or electric
shock:
• Smoke or strange smell coming from the unit.
• If the product falls or the case is damaged.
• If water or any metallic objects falls into the product.
 • If the power supply cord is damaged in any way.
• If the unit is malfunctioning.
• Do not insert or drop metallic objects or flammable materials into the ventilation holes of the product's cover, as this may result in
electric shock or fire.
• Do not place any containers with liquid or metallic objects on the top of the product. If any liquid spills into the unit, fire or electric
shock may result.
• Neveroperatethisproductortouchthepowersupplycordduringanelectricalstorm,electricshockmayresult.
• Neverexceedthewattageontheproductwhenconnectingequipment.Fireand/orpropertydamagemayresult.
• Operatetheproductonlywiththevoltagespecifiedontheunit.Fireand/orelectricshockmayresultifahighervoltageisused.
• Do not modify, kink, or cut the power cord. Do not place the power cord in close proximity to heaters and do not place heavy
objects on the power cord, including the product itself, doing so may result in fire or electrical shock.
• Ensurethatthesafetygroundterminalisconnectedtoaproperground.Neverconnectthegroundtoagaspipeasacatastrophic
disaster may result.
• Be sure the installation of the product is stable, avoid slanted surfaces as the product may fall and cause injury or property damage.
CAUTION – When the Device is in Use
• Neverplaceheavyobjectsontheproduct,causingittofalland/orbreak,resultinginpersonalinjuryandpropertydamage.Inaddi-
tion, the product itself may fall and cause injury and property damage.
• ContactAtlasSoundforinstructionsoncleaningtheinsideoftheunit.Largeaccumulationsofdustinsidetheunitmayresultin
heat buildup and fire.
• Ensurethatthepowersupplyplugissecurelypluggedintothewalloutlet.Neverallowdusttoaccumulateonthepowerplugor
inside the wall outlet.
• Whencleaningtheunitortheunitisnottobeoperatedforanextendedtimeperiod,unplugthepowercordfromthewall.