Owner`s manual

OWNER'S MANUAL
Specifications are subject to change without notice
www.AtlasSound.com
1601 JACK MCKAY BOULEVARD ENNIS, TEXAS 75119 U.S.A. • TELEPHONE: [phone] • FAX: [phone]
© 2008 ATLAS SOUND LP Printed in U.S.A. ATS003064 RevA 3/08 10
AA-GPN1200
AA-GPN1200 SPECIFICATIONS
Filter Selection: White, Pink Noise
Gain Control: Variable, PRE EQ 500mV, POST EQ 1V
Line Output: Balanced, Phoenix type Connector
EQ Control: Variable Hi Cut 1 KHz – 7 KHz, By pass switch
Supply Voltage: UL Rated External 24VDC Power Supply
Panel Finish: Black
Dimensions: Chassis: 4" (100 mm) W., x 1.75" (45 mm) H. x 3.16" (80 mm) D
Rack Mount Panel: 19" (485 mm) W, 1.75" (45 mm) H
ARCHITECT AND ENGINEER SPECIFICATIONS
The analog noise generator shall be Atlas Sound Model AA-GPN1200. It shall be capable of
producing either pink or white noise with a minimum output level of .5V into 600 Ω. It shall
have a Hi-Cut filter adjustable from 7 kHz to 1 KHz at 6 dB per octave. The filter shall be
have a bypass switch. The generator shall have a external UL rated 24VDC power supply.
The Atlas AA-GPN1200 can be used as a stand alone unit or rack mounted with a 19"
1 RU panel. Panel is included. All controls shall be rear mounted to prevent unauthorized
tampering. The balanced output connection are via an three position Phoenix type
connector. Finish shall be black semi-gloss epoxy.