User's Manual

Owner’s Manual

TSD-RMK

TSD Rack Mount Kit

AtlasSound.com – 1 –

Specifications are subject to change without notice.

1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.

Telephone: 800.876.3333 • Fax: 800.765.3435

TSD-RMK

TSD Rack Mount Kit

PAGE 1
Owner’s Manual TSD-RMK TSD Rack Mount Kit TSD-RMK TSD Rack Mount Kit 1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A. Telephone: 800.876.3333 • Fax: 800.765.3435 –1– Specifications are subject to change without notice. AtlasSound.
PAGE 2
TSD-RMK TSD Rack Mount Kit Owner’s Manual Description The Atlas Sound TSD-RMK is a 1RU mounting plate for rack mounting up to 4 Atlas Sound Time Saving Devices. This rack kit mounts the TSDs from behind the plate so all LEDs and front controls are easily accessible, simplifiers adjustments and status checks. The TSD design mandate was to make the installation of any TSD quick and reliable, saving you valuable time and money.
PAGE 3
TSD-RMK TSD Rack Mount Kit Owner’s Manual TSD Installation 1. Line up the TSD with the TSD-RMK top clearance holes in the space you want your TSD located. 2. Using two (2) M3 x 3mm Pan Head screws, thread through the top mounting holes into the threaded inserts on the TSD. Note: Do not over tighten screws or damage might occur. 3. Secure the bottom of the TSD to the TSD-RMK in the same manner using two (2) M3 x 5mm Flat Head screws. 4.
PAGE 4
TSD-RMK TSD Rack Mount Kit Owner’s Manual Limited Warranty All products manufactured by Atlas Sound are warranted to the original dealer/installer, industrial or commercial purchaser to be free from defects in material and workmanship and to be in compliance with our published specifications, if any.