Brochure

3/5
AtlasIED.com
TELEPHONE: [phone]
FAX [phone]
1601 JACK MCKAY BLVD.
ENNIS, TEXAS 75119 U.S.A.
©2016 Atlas Sound L.P. and Innovative Electronic Designs, LLC. All Rights Reserved. Atlas Sound is a trademark of Atlas Sound L.P. IED is a registered trademark of Innovative Electronic Designs, LLC. All other trademarks are the property of their respective owners. All specs are subject to change without notice. ATS005236 RevA 5/16
Electrical Specications (General)
Total Harmonic Distortion 1 kHz and 1 dB Below
Rated Power
0.05%
Signal to Noise Ratio >85dB Below Rated Output (A-Weighted)
Frequency Response 20Hz - 20kHz (+0/-1.5dB)
Input Sensitivity 0.775V / 1.0V / 32dB (Selectable)
Slew Rate >10V/µs
Damping Factor (20Hz to 400Hz) >800
Gain 40dB (8Ω Factory Ship or 32dB Assignable)
Crosstalk CH1-2 & CH 2-1 >70dB
Max Voltage Per Output 8Ω 103V
Max Current per Output 4Ω 26A
Protection Soft Start, Input RF, DC, Short Circuit, Current Overload, Clip Limit, AC Mains Under / Over Voltage Shut Off,
Peak Current Limit, Over Temp
AC Power Requirements
Operating Voltage Auto Switch, 50/60Hz 88V-135V & 180V-264V
Minimum Power-Up Voltage 88V
Maximum Operating Voltage 264V
Mains Connector Included - Removable 30A 125V NEMA L5-30 Male Plug or User Select
Power Cord (Ships With) Fixed, 10-Gauge 3M Cord, 1.5M
Power Consumption & Current Draw @ 120V AC Mains
Standby Mode 212mA .6W 2.05 BTU
Idle Active 1.05A 96W 328 BTU
Average Power 4 Ohm, All CH Driven 7.46A 407W 1389 BTU
Average Power 70.7V, All CH Driven 10.87A 500W 1707 BTU
Max Power 4 Ohm, All CH Driven 25.66A 1288W 4396 BTU
Max Power 70V, All CH Driven 25.66A 1288W 4396 BTU
Cooling
Cooling System Fan (Variable With Temperature)
Air Inlet Filter Yes, Rear, Washable
Cooling Air Flow Direction Rear to Front
Dimensions and Weight
Rack Mount Requirements 2 RU, 19"
Dimensions - Unit 19"W x 3.5"H x 15"D (483mm x 89mm x 381mm)
Dimensions - Shipping 23"W x 6.5"H x 22"D (584mm x 165mm x 558mm)
Weight - Unit 29.2 lbs. (13.2kg)
Weight - Shipping 35.2 lbs (15.9kg)
Agency Approvals
North America Agency ETL
Testing Standard North America 60065
FCC Class A (Conducted & Radiated Emissions) Part 15 of the FCC Rules
CE Yes (Includes RoHS & WEEE)
Optional Accessories
HPA-DAC2 - Dante™ Digital Audio Interface 2 Channel Receive (Only)- Field Installable
NOTES:
1. Power level measurement is define as follows: 1Hz Sine wave signal burst of 20 cycles (20mS) at 1% THD+N, followed by 480 cycles of a 1kHz sine wave at 10% of the
max power. Other power measurements are available upon requests.
2. Average Power is defined as Pink Noise input signal applied to achieve 1/4 of the 4 Ohm or 70.7V power rating.
3. Max Power is defined as 1 KHz input signal applied to achieve the maximum power output before clipping into a 4 Ohm or 70.7V load.