Brochure

3/7
AtlasIED.com
©2016 Atlas Sound L.P. and Innovative Electronic Designs, LLC. All Rights Reserved. Atlas Sound is a trademark of Atlas Sound L.P. IED is a registered trademark of Innovative Electronic Designs, LLC. All other trademarks are the property of their respective owners. All specs are subject to change without notice. ATS005229 RevC 4/16
TELEPHONE: [phone]
FAX [phone]
1601 JACK MCKAY BLVD.
ENNIS, TEXAS 75119 U.S.A.
Control Ports (Rear Panel)
GPIO Port QTY 4, Remote Level & Mute Functions, Assignable, PHX Connector
Ethernet GUI Access, RJ45
Output Terminals (Speaker)
Output Connectors Type Screw Terminal Barrier Strip with Cover
Output Connectors Number of Terminals 8
Output Connectors Fixed or Removable Fixed
Wire Size 18-10 AWG When Using Yellow Spade Lug .250 Terminal, QTY 8 Included (Class 3 Wire required)
Terminal Spacing .300" (7.62mm)
Current Rating 25A per Terminal
Electrical Specications (General)
Total Harmonic Distortion 1 kHz and 1 dB Below
Rated Power
0.03%
Signal to Noise Ratio >100dB Below Rated Output (A-weighted)
Frequency Response 20Hz - 20kHz (DSP Filters Set to Flat)
Damping Factor (20Hz to 400Hz) 78.46 (78)
Crosstalk CH1-2 & CH 2-1 73dB
Max Output Peak Voltage 8Ω Per CH 55V
Max Output Peak Current 4Ω Per CH 11.5A
Slew Rate >6V/µS
Protection Hi/Low Input Voltage, Thermal, Short, Over Current
AC Power Requirements
Operating Voltage 110V-120V & 220V -230V 50/60Hz, Auto Sense
Minimum Power-Up Voltage 90V
Maximum Operating Voltage 264V
Mains Interface IEC 15A Receptical
Power Cord (Included) 1.5m, IEC C13 to NEMA 5-15P Plug, 16AWG
Power Consumption and Current Draw
Sleep Mode 94mA 2.2W 8 BTU
Standby APD Mode (Note 2) 199mA 19W 65 BTU
Idle Active Mode (Note 2) 246mA 26W 88 BTU
Average Power 4 Ohm All Channels Driven (Note 3) 3.2A 375W 426 BTU
Average Power 70V, All Channels Driven (Note 3) 3.5A 415W 446 BTU
Max Power 4 Ohm, All Channels Driven (Note 4) 10.2A 1189W 775 BTU
Max Power 70V, All Channels Driven (Note 4) 9.5A 1245W 1818 BTU
Cooling
Cooling System Idle: Convection, In Use: Signal Sense Variable Speed Fan Assist
Cooling Air Flow Direction Rear to Front
Dimensions and Weight
Rack Mount Requirements 2 RU, 19"
Dimensions - Unit W 19" x H 3.47" x D 14.5" (483mm x 89mm x 368mm)
Dimensions - Shipping W 24.5" x H 5.0 " x D 18.7' (623mm x 127mm x 475mm)
Weight - Unit 20.8 lbs. (9.53kg)
Weight - Shipping 26 lbs (11.8kg)
Agency Approvals
North America Agency TUV
Testing Standard North America 60065
FCC Class A (Conducted & Radiated Emissions) Part 15 of the FCC Rules
CE Yes (Includes RoHS & WEEE)