Brochure
AtlasSound.com
2/2
1601 JACK MCKAY BLVD. ENNIS, TEXAS 75119 U.S.A.
TELEPHONE: (800) 876-3333
FAX (800) 765-3435
©2014 Atlas Sound L.P. All rights reserved. Atlas Sound is a trademark of Atlas Sound L.P. All other trademarks are the property of their respective owners. ATS004801 RevA 2/14
Architect & Engineer Specifications
The product shall be a one channel 1RU half rack power amplifier and provide 100 Watts into a 4Ω load. The unit shall utilize rail tracking Class D
topology and switch mode power supply technology. The front panel shall have Green signal presence LEDs and Red limit status LEDs along with
master level controls. The front panel shall have mains power switch with power Blue “ON” and flashing “Standby” status LED indicator. The rear
panel shall have balanced inputs with removable phoenix style connectors and an input impedance of 20KΩ. The unit shall have unbalanced RCA input
connections with input impedance of 10KΩ. Output terminations are made via phoenix style connectors. The unit shall have an audio sense
turn-on from standby mode, with threshold of 5mV. The unit shall draw 1 Watt in standby mode. The unit shall incorporate web enabled DSP features
including EQ, hi & lo Cut filters, level control / assignment and limiter settings. The unit shall have an input sensitivity of 320mv, frequency response
of 30Hz – 20KHz (±3dB) and an average THD of .02%. The unit includes a mounting pole installation process via a sealed hole incorporated into the
chassis design. The amplifier chassis hole shall accept a 1.5" mounting tube. The pole clamp system shall be included with the unit. An optional rack
mount kit allows single or dual mounting in a 1RU high configuration. The unit shall be 8.5" (216mm) Wide x 1.75" (45mm) Height x 13.5" (343mm)
Depth. The unit shall weigh 4.9lbs (2.2Kg). The unit shall be RoHS compliant. The unit shall be compliant with IEC/ UL60065. The unit shall be the
Atlas Sound DPA-102PM.
DPA-102PM