Instruction Manual

Atlas Labs Pty Ltd. | www.atlaslabs.com.au
Additional information on labeling and user information requirements for Part 15 devices can
be found in KDB Publication 784748 available at the FCC Office of Engineering and Technology
(OET) Laboratory Division Knowledge Database (KDB) https://apps.fcc.gov/oetcf/kdb/index.cfm
5.2 RF Exposure
All transmitters regulated by FCC must comply with RF exposure requirements. KDB 447498
General RF Exposure Guidance provides guidance in determining whether proposed or existing
transmitting facilities, operations or devices comply with limits for human exposure to Radio
Frequency (RF) fields adopted by the Federal Communications Commission (FCC).
From the 2AURCLRNHEL FCC Grant: Output power listed is conducted. This grant is valid only
when the module is sold to OEM integrators and must be installed by the OEM or OEM
integrators. This transmitter is restricted for use with the specific antenna(s) tested in this
application for Certification and must not be co-located or operating in conjunction with any
other antenna or
transmitters within a host device, except in accordance with FCC multi-transmitter product
procedures.
6