Instruction Manual

Atlas Labs Pty Ltd. | www.atlaslabs.com.au
5.0 Regulatory information
The 2AURCLRNHEL module has received Federal Communications Commission (FCC) CFR47
Telecommunications, Part 15 Subpart C “Intentional Radiators” modular approval in accordance
with Part 15.212 Modular Transmitter approval. Modular approval allows the end user to
integrate the 2AURCLRNHEL module into a finished product without obtaining subsequent and
separate FCC approvals for intentional radiation, provided no changes or modifications are
made to the module circuitry. Changes or modifications could void the user's authority to
operate the equipment. The end user must comply with all of the instructions provided by the
Grantee, which indicate installation and/or operating conditions necessary for compliance.
The finished product is required to comply with all applicable FCC equipment authorizations
regulations, requirements and equipment functions not associated with the transmitter module
portion. For example, compliance must be demonstrated to regulations for other transmitter
components within the host product; to requirements for unintentional radiators (Part 15
Subpart B “Unintentional Radiators”), such as digital devices, computer peripherals, radio
receivers, etc.; and to additional authorization requirements for the non-transmitter functions
on the transmitter module (i.e., Verification, or Declaration of Conformity) (e.g.,transmitter
modules may also contain digital logic functions) as appropriate.
5.1 Labeling and user information requirements
The 2AURCLRNHEL module has been labeled with its own FCC ID number, and if the FCC ID is
not visible when the module is installed inside another device, then the outside of the finished
product into which the module is installed must also display a label referring to the enclosed
module. This exterior label can use wording as follows:
A user's manual for the finished product should include the following statement:
5