Instruction Manual

Atlas Labs Pty Ltd. | www.atlaslabs.com.au

3.0 Interfacing with the LRNHEL module

The dedicated UART TX and RX pins (pins 6 and 7 respectively) can be used to interface with the

module. The default settings are:

Baud rate - 57600 bps

Packet length - 8 bit

Parity bit - No

Stop bits - 1 bit

Hardware flow control - No

The module can be wired up as shown in figure 3 below.

Figure 3: Example interfacing solution for the LRNHEL module