User manual

REV: 10-12 DOC: 1310B PAGE 14
INSTALLATION INSTRUCTIONS LC372 SOUND REINFORCEMENT MODULE
Figure 18 - BOOTP Server Options
Endpoint Device Discovery
Once the application is running, it will scan the network for any LANcom devices and they will appear in the Discovery
Window as shown below. The application will poll the devices at an interval that is accessible through the menu bar
Tools -> Options. The default polling interval is 5 sec. and this is suitable for most circumstances.
Figure 19 - Discovery Window
The columns in the Discovery Window are described below.
Type This displays the type of device that has been detected. LC372SR devices will be of type SRM.
This is a read-only field and cannot be edited.
MAC Address This is the hardware network address of the device. This is a read-only field and cannot be
edited.
BOOTP Enabled When checked, this device will get its IP Address from the BOOTP server. When not checked,
an IP Address must be manually typed in the IP Address field. For most applications, the
BOOTP server should be utilized and this item should remain checked.
IP Address This is the IP Address assigned to the device. If the BOOTP Enabled checkbox is not checked,
an address can be manually typed into this field to set the address of the device.
Node ID This is the unique identifier for the device. This is the number that will allow the LANcom SCS
software to utilize this device. This is also the Zone number that is used to reference this device
to program announcements, bells, and intercom calls.
Mic Group This corresponds to the group number of the announcement controller that owns the mic
station.
Mic Number This is a unique mic station ID number used to assign mic stations within a group.
Description This is a textual description to aid in identifying the device’s location and/or function.
Last Response This is a date and time stamp to mark the last receipt of a poll response from the device.