Owner`s manual

AL-MYNA

Wireless Infrared Microphone

AtlasSound.com – 4

Specifications are subject to

change without notice.

–

• Never move the device with the power cord plugged into the wall, as

damage to the power cord may result.

• When unplugging the cord from the wall, grasp the plug, NOT the cord.

• Never install this device in humid or dusty locations, nor in direct sunlight,

near sources of heat, or in areas where sooty smoke or steam are present.

Fire and electric shock may result.

• Keep all sides of the device at least 3

⁄2" away from objects that may

obstruct air flow to prevent the unit's internal temperature rise.

WARNING – When the Device is in Use

• To prevent electric shock, do not remove the device cover as there are high

voltage components inside. Refer all servicing to Atlas Sound.

• Should any of the following irregularities occur during use, immediately switch

off the power, disconnect the power cord from the AC outlet and contact Atlas

Sound. Do not to attempt to continue operation with the device as this may

cause fire or electric shock:

• Smoke or strange smell coming from the unit.

• If the device falls or the case is damaged.

• If water or any metallic objects falls into the device.

• If the power supply cord is damaged in any way.

• If the device is malfunctioning.

• Do not place any containers with liquid or metallic objects on the top of the

device. If any liquid spills into the unit, fire or electric shock may result.

• Never operate this device or touch the power supply cord during an electrical

storm, electric shock may result.

• Never exceed the wattage on the product when connecting equipment. Fire

and/or property damage may result.