Owner`s manual

AL-MYNA
Wireless Infrared Microphone
AtlasSound.com – 10
Specifications are subject to
change without notice.
–
The AL-MYNA can be used in two different modes that effect the control it has
over the AL2430 amplifier/receiver.
Mode 1:
• The right side blue LED will be illuminated
• Volume UP / DOWN buttons will control the microphone volume
• The Mute button mutes the microphone
Mode 2:
• Both blue LEDs will be illuminated
• Volume UP/DOWN buttons will control the multimedia inputs on the
AL2430 Receiver/Amplifier
• Mute button will mute the multimedia inputs on the AL2430
Receiver/Amplifier
Power and Panic buttons function as described below regardless of
microphones mode setting.
The Power button needs to be pressed for three seconds to turn the unit On
or Off.
When the Panic button is pressed along with the Mode button, a signal is sent
to the AL2430 Receiver/Amplifier. This closes its Panic Output relay. The Panic
Output relay can be connected to an external system. For example: the school’s
Paging / Intercom system to alert someone of an event in the class room that
requires immediate attention.