Brochure

Optional Equipment
Belt Guard Mounted Aftercooler
Cools down the air to provide trouble-free
protection against the costly effects of water
in your system.
Low Oil Level Switch
Prevents compressor from starting if the
oil level drops below the minimum level.
Electronic or Pneumatic Tank Drain
Provides automatic drainage of the condensate
which collects at the bottom of the air tank.
In line Filters
General purpose, high efficiency and odor removal
line filters to meet your high quality compressed
air needs.
Maintenance kits are also available for a 100% trouble free lifetime and to ensure the smooth operation of your AR compressor.
• Meeting your requirements for cleaner, dryer air
• Protecting your investment and end products
• Reducing your service and maintenance costs
FXHT Range of Dryers
Avoid condensation and chance of corrosion and damage
by removing water from the compressed air system.
Contractor Series
Technical specifications
HP MODEL AMPS MOTOR TANK CFM CFM L x W x H SHIP WT
Volts/Hz gal Displ @100psi inches lb
Single Stage Electric Contractor Series (130 psi maximum)
1.5 AR-1.5-2X4V-1-C 14 115/1 2 x 4 8.5 5.4 46 x 23 x 26 130
2 AR-2-2X4V-1-C 19/9.5 115/230/1 2 x 4 8.7 6.5 46 x 23 x 26 130
HP MODEL ENGINE STARTER TANK CFM CFM L x W x H SHIP WT
gal Displ @100psi inches lb
Single Stage Gasoline Drive Contractor Series (130 psi maximum)
5.5 AR-5.5-2X4V-H-G Honda Recoil 2 x 4 18.4 12.4 46 x 23 x 26 221
6 AR-6-2X4V-R-G Robin Recoil 2 x 4 18.4 12.4 46 x 23 x 26 221
HP MODEL ENGINE STARTER TANK CFM CFM L x W x H SHIP WT
gal Displ @100psi inches lb
Two Stage Gasoline Drive Contractor Series (175 psi maximum)
9 AR-9-2X4V-R-G Robin Recoil 2 x 5 22.4 18.6 50 x 29 x 37 316
9 AR-9-2X5V-H-G Honda Recoil 2 x 5 22.4 18.6 50 x 29 x 37 316
12.75 AR-12.75-2X5V-K-G Kohler Elec & Recoil 2 x 5 33 25.3 50 x 29 x 37 345
MODEL 39
O
F PDP 50
O
F PDP OPERATING CONNECTION PRE-FILTER AFTER-FILTER L x W x H SHIP WT
SCFM SCFM KW Size inches lb
FXHT-1 20 25 0.44 0.5” NPT DD-17 PD-17 18 x 19 x 18 85
FXHT-2 40 50 0.77 0.5” NPT DD-32 PD-32 18 x 19 x 18 128
FXHT-3 60 75 0.85 1” NPT DD-32 PD-32 28 x 18 x 40 183
FXHT-4 80 100 1.20 1” NPT DD-44 PD-44 28 x 18 x 40 194
FXHT-5 100 125 1.25 1” NPT DD-50 PD-50 28 x 18 x 40 200
1-12.75 hp
Ideally suited for small portable construction
applications, the Contractor Series provides affordable
compressed air in a small light-weight package. Low
profile design, semi-pneumatic wheel, heavy gauge
wire belt guard and rugged pump design provide the
Contractor Series compressors with convenient point-
of-use versatility. Models are available with electric or
gas drive.