Brochure
Technical specifications
HP MODEL TANK DISPLACEMENT ACFM L x W x H SHIP WT RECOMMENDED
Gallons CFM @100psi @175psi inches lb DRYER MODEL
5 AR-5EV-60V 60 vertical 18.6 15.3 13.8** 31 x 22 x 72 300 FXHT-1
5 AR-5EV-80V 80 vertical 18.6 15.3 13.8** 36 x 24 x 73 382 FXHT-1
5 AR-5E-80V 80 vertical 22.4 18.5 16.6 36 x 24 x 77 428 FXHT-1
5 AR-5-80V 80 vertical 22.4 18.5 16.6 36 x 24 x 77 457 FXHT-1
5 AR-5-80H 80 horizontal 22.4 18.5 16.6 71 x 24 x 49 471 FXHT-1
7. 5 AR-7.5-80V 80 vertical 32.5 25.3 22.3 36 x 24 x 77 479 FXHT-1
7. 5 AR-7.5-80H 80 horizontal 32.5 25.3 22.3 71 x 24 x 49 538 FXHT-1
10 AR-10-120V 120 vertical 42.4 35 32 42 x 30 x 74 890 FXHT-2
10 AR-10-120H 120 horizontal 42.4 35 32 73 x 24 x 49 830 FXHT-2
Two Stage Pistons
5-20 hp / 175 psi
Available in vertical or horizontal configurations,
these highly reliable and long lasting compressors
are perfect for any number of applications.
**Max pressure is 165 psi
Magnetic starters not required on the
AR-5EV and AR-5E
• ASME tanks and safety valves insure these
compressors will be a safe addition to any facility.
• Easily accessible and high efciency inlet air lters
provides confidence that your compressor will provide
“clean” air and an extended operational life.
• The two-stage, slow running design coupled with the
finned cylinders and aftercooler delivers a high
efficiency design and exceptional reliability.
• Single and three phase motors are available to suit
every supply voltage.
• Magnetic starters are standard on every HP size
ensuring motor is adequately protected.
• Large multi blade ywheel with fully enclosed PVC
coated wire belt guard ensuring low noise, safe
operation and superior cooling.
• Start-stop pressure switch control.
• Viton shaft seals on the 5 & 7.5 HP for exceptional
sealing and enhanced reliability.
• Cast iron construction on the 10 HP pumps for extended
life for higher demand applications.
• Standard two year bumper to bumper warranty.