Product Manual

Overview of the screens
Menu item Submenu Digital input screen Designation
<dAtA>
Data
<d.1> Calling up running hours
<d.2> Calling up motor starts
<d.3> Calling up module hours
<d.4> Calling up loading hours
<d.5> Calling up load solenoid valve
<d.6> Calling up service timer
<ProG>
Programming
<rEG.P>
Regulation Pressure
<Pr.SL> Calling up modifying pressure band
selection
<LPr.1> Calling up modifying pressure band settings
<uPr.1> Calling up modifying pressure band settings
<LPr.2> Calling up modifying pressure band settings
<uPr.2> Calling up modifying pressure band settings
<tiMr>
Timer
<SrV.d> Calling up maintenance warning
<diSP>
Display
<tEMP> Calling up modifying unit of temperature
<PrES> Calling up modifying unit of pressure
<bC.LG> Calling up modifying time of backlight
<Ctrl>
Control
<Lo.rE> Calling up local/remote start/stop
<Ar.Af> Calling up automatic restart after voltage
failure
<Ar.d> Calling up delay automatic restart after
voltage failure
<nHCA> Calling up number of hourly compressor
activation
<PASS> Activating password protection
<tEst>
Test
<tSt.1> Display testing
<info>
Info
<P.rEL> Parameter Map Release
<F.rRl> Firmware Release
<F.dAY> Firmware Release Day
<F.Mnt> Firmware Release Month
<F.YAr> Firmware Release Year
<SEr.n> Serial number
3.10 Calling up running hours
Starting from the Main screen:
•
Press Enter button (7) for 3 seconds to enter the Main menu.
• Select <dAtA> and press Enter button (7) to enter the Data menu.
• Scroll Up or Down buttons (4-8) until <d.1> and the motor stopped symbol is shown.
• Press Enter button (7): the running hours are shown.
Instruction book
2920 7191 00 37