Product Manual
Table Of Contents
- Table of contents
- 1 Safety precautions
- 2 General description
- 3 Elektronikon Base Controller
- 3.1 ElektronikonTM Base Controller
- 3.2 Control panel
- 3.3 Icons used on the display
- 3.4 Main screen
- 3.5 Main function
- 3.6 Shutdown warning
- 3.7 Shutdown
- 3.8 Service warning
- 3.9 Scrolling through all screens
- 3.10 Calling up running hours
- 3.11 Calling up motor starts
- 3.12 Calling up module hours
- 3.13 Calling up loading hours
- 3.14 Calling up load solenoid valve
- 3.15 Calling up/resetting the service timer
- 3.16 Calling up/modifying pressure band selection
- 3.17 Calling up/modifying pressure band settings
- 3.18 Calling up/modifying the unit of temperature
- 3.19 Calling up/modifying the unit of pressure
- 3.20 Calling up/modifying backlight time
- 3.21 Activating automatic restart after voltage failure
- 3.22 Keyboard lock
- 4 Installation
- 5 Operating instructions
- 6 Maintenance
- 7 Adjustments and servicing procedures
- 8 Problem solving
- 9 Technical data
- 10 Instructions for use
- 11 Guidelines for inspection
- 12 Pressure equipment directives
- 13 Declaration of conformity
Electric cubicle UL, G15 (YD)
Reference Designation
F1 Primary fuse, transformer of the control circuit
F2–3 Fuses
F4 Fuse
F5 Fuse
FM1 Motor overload relay
KA Auxiliary circuit relay
KD Delta contactor
KL Line contactor
KMD Dryer relay (Only on Full-Feature)
KY Star contactor
T1 Transformer
X1 Terminal block of the control circuit
X2 Terminal block, voltage change of the motor (Only on tri-voltage units)
X5 Terminal block, voltage change of the dryer transformer (Only on tri-voltage FF units)
Instruction book
22 2920 7191 00