Product Manual
Table Of Contents
- Table of contents
- 1 Safety precautions
- 2 General description
- 3 Elektronikon Base Controller
- 3.1 ElektronikonTM Base Controller
- 3.2 Control panel
- 3.3 Icons used on the display
- 3.4 Main screen
- 3.5 Main function
- 3.6 Shutdown warning
- 3.7 Shutdown
- 3.8 Service warning
- 3.9 Scrolling through all screens
- 3.10 Calling up running hours
- 3.11 Calling up motor starts
- 3.12 Calling up module hours
- 3.13 Calling up loading hours
- 3.14 Calling up load solenoid valve
- 3.15 Calling up/resetting the service timer
- 3.16 Calling up/modifying pressure band selection
- 3.17 Calling up/modifying pressure band settings
- 3.18 Calling up/modifying the unit of temperature
- 3.19 Calling up/modifying the unit of pressure
- 3.20 Calling up/modifying backlight time
- 3.21 Activating automatic restart after voltage failure
- 3.22 Keyboard lock
- 4 Installation
- 5 Operating instructions
- 6 Maintenance
- 7 Adjustments and servicing procedures
- 8 Problem solving
- 9 Technical data
- 10 Instructions for use
- 11 Guidelines for inspection
- 12 Pressure equipment directives
- 13 Declaration of conformity
2 General description
2.1
Introduction
Introduction
G 7, G 11 and G 15 are air-cooled, single-stage, oil-injected screw compressors, driven by an electric
motor.
The compressors are enclosed in sound-insulating bodywork.
An easy-to-operate control panel is provided, including the start/stop switch and the emergency stop
button. A cabinet housing the controller, pressure sensor and motor starter is integrated into the bodywork.
Floor-mounted model
The compressor is installed directly on the floor.
Tank-mounted model
G 7, G 11 and G 15 tank-mounted are supplied with an air receiver of 270 l (71.28 US gal / 59.40 Imp gal /
9.45 cu.ft) or 500 l (132 US gal / 110 Imp gal / 17.50 cu.ft).
Front view, G 15 Full-Feature tank-mounted
Reference Designation
1 Electric cabinet
Instruction book
10 2920 7191 00