Product Manual

• For AWG2/0, the maximum current is 175 A, which is sufficient => use AWG2/0
•
Install the prescribed maximum fuse (150 A) on each cable
• Parallel supply cable (2 x 3 phases + 2 PE - configuration (2)):
• I = (128 A + 25%)/2 = (128 x 1.25)/2 = 80 A
• For a AWG4, the maximum current is 85 A x 0.8 = 68 A, which is insufficient. For an AWG3, the
maximum current is 100 x 0.8 = 80 A. So 2 parallel cables of 3 x AWG3 + 2 x AWG8 are sufficient.
• Install 80 A fuses on each cable.
8.3 Reference conditions and limitations
Reference conditions
Air inlet pressure (absolute) bar 1
Air inlet pressure (absolute) psi 14.5
Air inlet temperature ˚C 20
Air inlet temperature ˚F 68
Relative humidity % 0
Working pressure See section Compressor data.
Limitations
Maximum working pressure See section Compressor data.
Minimum working pressure bar(e) 5.5
Minimum working pressure psig 80
Maximum air inlet temperature ˚C 46
Maximum air inlet temperature ˚F 115
Minimum ambient temperature ˚C 1
Minimum ambient temperature ˚F 34
8.4 Compressor data
Reference conditions
All data specified below apply under reference conditions, see section Reference
conditions and limitations.
Common compressor data
Unit
Number of compression stages 1
Temperature of the air leaving the outlet valve (approx.), Workplace ˚C 37
Temperature of the air leaving the outlet valve (approx.), Workplace ˚F 99
Instruction book
2920 7109 21 111