Specifications

11
Programming - NXT-G
Programming in NXT-G for the Ruins of Atlantis (with the Virtual NXT) works the same
way as if you programmed with a physical NXT. NXT-G will automatically connect to the
Virtual NXT if it is open on your computer and you don’t have a physical LEGO robots
connected. In the lower-right corner of the NXT-G interface there is a series of control
buttons. The button with the NXT silhouette will allow you to see the Virtual NXT, named
“Virtual NXT” by default.
The Download (downward arrow) button will download programs to the Virtual NXT,
which connects to the virtual robot in Ruins of Atlantis.
The Download and Run (right arrow) button will download a program to the Virtual
NXT AND start running it in Ruins of Atlantis. When working on a challenge, we
recommend getting the virtual robot into a start position in the virtual world, then
pressing the Download and Run button.
1
2
1
2
Remember that you can press the
reset button (circular arrow) on the left
side of the virtual world to reset the
robot to its original position.
Pressing the Play button (right arrow),
will run the program most recently
downloaded to the Virtual NXT.
Programming with Ruins of Atlantis