System information

144
Setup->PTZ
Allows you to set the protocol/address/Baud Rate/Data bit/Stop Bit/parity of PTZ.
 【Channel】Select the channel PTZ located
 【Protocol】Select the PTZ Protocol: PELCO-D or PELCO-P
 【Address】Set up the PTZ address
 【Baud Rate】Set up the Baud rate PTZ supported
Note:
When one DVR is connected with several PTZs, it must have dip switch to set up different address positions.
And put the terminal resistance in the farthest PTZ to ensure stable control, which won’t cause cross
influence when working.