System information

128
Motion detection setup procedures:
 Turn On the corresponding channel Status in Advanced->Motion Detection option;
 Set the sensitivity level as necessary, usually set at 3 or 4;
 Set the motion area of the corresponding channel in the MD AREA option;
 In the Recording Mode screen, set the corresponding channel to ON in the Channel option;
 In the Recording Mode screen, select By Timer in the Recording Mode option, also click
Schedule to enter the Record Time Configuration screen and set the corresponding time to ALARM
recording
After the setup has been done and motion detection is triggered, a red letter M will appear in the screen of
this channel.
4.6 ADVANCED->MOBILE
 Usern Name: Specify the user for mobile authentication.
 User Password: Specify the password for mobile authentication.
 Server Port: The default port number is 15961 for DVR video and audio transmission. The range of
port numbers is from 2048 to 32767.
Please connect DVR to Internet before setting DVR port number and the server port
number is not equal to network menus.
The user name and password you enter can not be empty.
You should forward the server port number to router