System information

127
4.6 ADVANCED->INFO
There are informations about SW/HW.
 System/HW Info: (Enter into [System Information] menu to view SOFTWARE VERSION, UI
VERSION, MAC ADDRESSS and SERIAL NUMBER:
4.6 ADVANCED->MOTION DETECTION
 STATUS: Each channel has a corresponding switch. Select “On” or “Off”.
 SENSITIVITY: Each channel has a corresponding sensitivity setting, with the 4 levels of 1, 2, 3 and 4,
in which 4 is the highest. Select sensitivity for confirmation.
 MD AREA: Each channel has a corresponding motion detection area setting. Move the cursor to
“Setup” of the corresponding channel, and press “Enter” to enter the motion area setup screen of this
channel, where a red block indicates motion detection is activated for this area and a transparent block
indicates motion detection is not activated, as shown below.
The channel is separated into a 13X10 area. When any object moves into the motion detection area, the
alarm will be triggered.