System information

125

ALARM MANAGEMENT OUTPUT/BUZZER/POST REC: including time for alarm output, time for
internal buzzer and post alarm recording. You can set how long the external sensor
Alarm/Buzzer/Post Rec will last when motion is detected (off, 10s, 20s, 40s, 60s or up to 5
minutes for Recording);
 Initial Trigger: When channel has been triggered, the triggering event will
be displayed on full screen for the duration of the period set in Trigger Full
Screen. During that period, this channel will ignore any other triggering
events.
 Continuous Trigger: When channel has been triggered, the triggering event
will be displayed on full screen for the duration of the period set in Trigger Full
Screen. The channel is, however, still actively monitoring during that period.
Should there be a new triggering event, this channel will display the more
recent event and restart the display period.
This device use CONTINUOS TRIGGER.
 Video Loss: Sends alarm when DVR can’t receive video signal (such as
camera damage, cable broken or damaged or power supply malfunction).
 Motion Detection: When an object moves into motion detection area, alarm
will be triggered. You can adjust sensitivity level to suit the needs of your
actual application environment.
 HDD Loss/Space: When Hard Drive is not detected (HDD damage, power
supply malfunction), or HDD auto-overwrite is off, and free space is not
enough, an alarm will be triggered.