System information

121
 DEVICE ID: It is just okay to enter device ID displayed on the right side in corresponding input box.
The default ID will be guided when mouse operation is done. We recommend setting a password when
remote controller is operating many types of equipment, to distinguish through targeted equipment
code input, or the remote controller will disturb the adjacent mainframe.
 PASSWORD ENABLE: When you set Password to ENABLED you can setup a user password and
administrator password respectively. The password must be 6 characters (numbers).
 USER PASSWORD: The ordinary users can only carry out monitor and video search/ playback
operations.
 ADMIN PASSWORD: The administrator has all the operating privileges.
CLEAR IE PASSWORD: Use this botton in oprder to erase the IE password.
If you forget system password, enter 101101 into the password field to reset the
password.
4.6 SETUP->CAMERAS
You can set up whether each channel can be previewed or not under Live display and/or record mode,
enable live time or not under live screen and set up record time or not on the record history.