System information

114
The DVR’s initial device ID is 000000 without any password, the user can enter main menu directly. Users
can set ordinary password and administrator password. The administrator has all the operating privileges,
while ordinary users can only carry out monitor and video search/ playback operations. (The mainframe will
match automatically when you enter password, and different permissions will be given according to different
passwords).
If you want to operate in main menu after the password is set, the system will display “user login”
interface:
Device ID: It is just okay to enter device ID displayed on the right side in corresponding input box. The
default ID will be guided when mouse operation is done. We recommend setting a password when remote
controller is operating many types of equipment, to distinguish through targeted equipment code input, or
the remote controller will disturb the adjacent mainframe.
Click mouse right button after system startup, and quick operations are available to DVR system in the pop-
up menu. Users can set or control parameters including main menu, key lock, video search, PTZ control and
video recording.
 【Playback】: Search detailed recording files
 【Record】: Set the recording mode including channels, quality, frame rate, etc.
 【HDD】: Check HDD capacity and formatting
 【Setup】: Setup of system basic information including language, time, user password, etc.
 【Advanced】: Setup of alarm, motion detection, and mobile phone surveillance, etc.
 【Exit】: Exit menu
4.2 Pop-out menu options (Menu Lock)
For your system security, the system has a special function to protect your OSD operation.
 Step 1. Enable Password from system.
 Step2. ClickKeyLock button, and then the OSD was locked.
Split Windows (For 8 CH Only)
There are 3 modes of split windows:
1. CH 1-4
2. CH 5-8
3. CH 1-8
Cruise(PTZ)
This function allows to start cruise of PTZ camera.
PIP Mode
Rec Search
For more information of record search , please refer to section 4.7.