ITALIANO Questo prodotto è coperto da garanzia Atlantis della durata di 2 anni. Per maggiori dettagli in merito o per accedere alla documentazione completa in Italiano fare riferimento al sito www.atlantis-land.com. ENGLISH This product is covered by Atlantis 2 years warranty. For more detailed informations please refer to the web site www.atlantis-land.com. For more detailed instructions on configuring and using this device, please refer to the online manual.
INDEX 1. Introduction ....................................................................................... 8 1.1 Product features: ......................................................................... 8 1.2 System Requirements .................................................................. 8 2. Package contents ............................................................................... 9 3. Getting Started .................................................................................
Copyright Statement No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, whether electronic, mechanical, photocopying, recording or otherwise without the prior writing of the publisher. Windows™ 98SE/2000/ME/XP/VISTA are trademarks of Microsoft® Corp. Pentium is trademark of Intel. All copyright reserved. The Atlantis Land logo is a registered trademark of Atlantis Land.
Declaration of Conformity Hereby We declare that this product is in compliance with the essential requirements and other relevant provisions of “Electromagnetic Compatibility” Directive 2004/108/EC within CE Marking Requirememnt. CE Declaration is available on the web site www.atlantis-land.com.
Limited Warranty Our warranties (for hardware and software) do not cover data loss – back up the contents of your drive to a separate storage medium on a regular basis. Also, consequential damages; incidental damages; and costs related to data recovery, removal and installation are not recoverable under our warranties. Safety Information Only qualified personnel should carry out technical work on the device.
Thank you for purchasing our 2.5” Smart Backup Disk enclosure. 1. Introduction This guide contains information regarding the product features and the procedures of installation for this device. Please read this guide thoroughly before you begin its installation and operation and retain it for future references. The Smart Backup Disk is a standalone and portable storage enclosure. It allows you to install a high-speed 2.5” SATA hard drive by DIY and implements a high performance backup storage device.
2. Package contents Please check that the following items are included in the package. If any the listed items are missing or damaged, please return imediately the whole package to your local dealer.
3. Getting Started Before using the 2.5”Smart Backup Disk Enclosure Electrostatic discharge can damage electronic components. Be sure you are properly grounded before the beginning of any procedure.You can touch the metal parts of a computer’s chassis or power supply unit to discharge any static charge that may have accumulated inside your body. To avoid damage to your hard drive, please handle with much care. Do not shake or drop your hard drive. All electronic components have a limited lifetime.
Take out the plastic cover and circuit board.
Connect your 2.5” SATA hard drive to the SATA connector on the circuit Board. Place the hard drive back to the aluminum housing 1. Slide the hard drive carefully into the bottom of aluminum housing. 2. The hard drive should be placed in accordance with the picture below. 3. Close the cover by applying the previously removed screws. 4. Please handle with much care. Make sure that the SATA hard drive does not become detached in the process.
Connect the Smart Backup Disk to your computer via the USB “Y” cable. Connect both USB “A” plugs to your computer’s USB host ports and at the other end connect to the Smart Backup Disk’s mini USB port.
4. Finding Smart Backup Disk in Windows and Mac OS Questo prodotto non necessita di driver per i sistemi operativi Windows 2000, WindowsXP、Windows Vista/7 e Mac OS.X. E’ sufficiente solo collegarlo al PC con l’apposito cavo. Il sistema installerà automaticamente il software necessario all’ utilizzo del disco esterno, sarà quindi possibile visualizzarlo come una normale risorsa del sistema. This DiskMaster is driver-free for Windows2000,WindowsXP,Windows Vista/7 and Mac OS.
4.1 LED There is a status LED on the DiskMaster for diagnosis, it lights green when this device detected by the system and flash orange if the data is being transmitted between PC and DiskMaster.
4.2 Safely Removing your Smart Backup Disk It’s recommended to disable the "Removable Device" icon on the status bar before unplugging the DiskMaster. In Macintosh®, you can use “Eject” command to eject this storage device for safe remove.
5. Backup Software 5.1 Button Manager Utility Installation The DiskMaster provides a special backup button for file copy function. It provides an easy way to make a backup task just by touch of a button. Firstly, install the button-manager backup utility software that comes with the bundle disc.
Click the “Next” button.
Choose the “Button Manager Application” and click “Next” to continue. Click “Install” button to begin the installation.
Click “Finish” button to exit the software installation. Choose “Yes, I want to restart my computer now” and click “OK” button to restart your computer.
After restarting your computer, the user will find an icon on the status bar of the windows on the bottom right. Click on the icon and choose “Automatic Backup”.
After clicking on the “Automatic Backup”, a backup task window will pop out for the user to configure the path setting. 5.2 Button Manager Utility Description When you begin using this Button Manager Utility, you will need to read the following sections of the “user interface description” and “Adding a new task” to know how to create a new backup task file that will do what you regularly need.
5.3 User Interface Description: TASK LIST(1): The task window shows all arranged tasks, each task will comprises of source directory, destination directory and attribute. OPEN(2): Open a previous preset backup task file. SAVE(3): Save current task list to a backup task file (as *.iniBackup file). Disk Properties(4): Display your host system’s current disk drives information. ADD(5): To add a new task in list. NEW(6): Create a new backup task file. DELETE(7): Deletes the chosen task.
DISPLAY PATH OF EXECUTING TASK(11): If checked, the preset task will be automatically loaded by backup button; otherwise the button function will be disabled. 5.4 Adding a New Task Click “Automatic Backup” from the status bar icon. When the task window pops out, click “Add” button to add a new backup task. ”. Set your daily backup tasks in the “Source Directory” and “Destination Directory” columns by clicking the browse button and check the necessary “Attributes” and “Task Direction”.
o o Source Directory: assign Source Directory location. Destination Directory: assign backup Destination Directory location. Complete the configuration of your presetting backup path then click “OK” button to continue.
The current task window will pop out again, you can add another task or click “Save” button to save the presetting path as a *.ini Backup file. Press “Exit” button to finish the backup task setting.
Now, when you press the “Backup Button” on Smart Backup Disk, the Button Manager utility will do the backup task as previously configured automatically.
5.5 Modify or Delete Button Backup Task Click “Automatic Backup” from the status bar icon. The current task list window that was previous saved will be shown. o Select your want to modify or delete task list. o Press “Modify” or “Delete” button to do change. o After change your task then press “Save” and “Exit”.
6. How to use an auxiliary power cord or power adapter SATA hard drives can be high power consumption storage devices. To operate the SATA hard drive successfully, you need to connect dual USB ports to get more power supply from another USB port by an USB Y-cable. If notebook user can not drive this DiskMaster, you may need use it by an external AC power adapter. Please refer following description of power supply issue. 6.
6.2 Using external AC switching power adapter The DiskMaster provides a DC jack for notebook user connects an external AC power adapter. Using an external power adapter can bring enough power for the SATA hard drive to run stably. You can refer to the following specification to purchase a suiting power adapter from your dealer. Output Voltage/Current: DC 5V/1.5A Plug dimension: a. Inner hole: 1.3mm b. Outer: 3.5mm c. Plug length: 6.5-7.
7. Troubleshooting This chapter covers some basic things you can do in the event that you encounter problems using this DiskMaster on your system. Why does the computer not recognize the Smart Backup Disk? Steps Action 1 Make sure that both USB plugs are properly connected to your host USB ports. Do not only connect the auxiliary USB plug. 2 Make sure that your host USB port is working properly. If you are unsure, please try another USB port. 3 If the error persists, you may have a hardware problem.
Why does the hard disk in the DiskMaster make continuous noises while the computer can not recognize the DiskMaster? Steps Action 1 This could be because not enough power is being supplied to your hard drive. Please make sure that you have connected both A-plugs of the USB “Y” cable to direct more power supply. See the “How to use an auxiliary power cord or power adapter” chapter for more detailed information.
8. Support For technical questions and support, please contact our help-desk by ticket on http://www.atlantis-land.com/ita/supporto.php. For generic informations, please send an e-mail to info@atlantis-land.com. For presales informations, please send an e-mail to prevendite@atlantis-land.com. Atlantis Via S. Antonio, 8/10 20020 Lainate (MI) Fax: +39.02.78.62.64.39 Website: http://www.atlantis-land.com Email: info@atlantis-land.
APPENDIX A: Technical Specs Technical Specs A06-HDE103 • Interface: USB 2.0 specification and backward compatible with USB 1.1 • HDD Support: 2,5 inch SATA hard drives up to 750 GB • HDD Interface: SATA II 3 Gbps • Data Transfer Rate: Up to 60MB/sec • Indicators: Green activity LED • Power source: USB Bus powered • Self- Powered Jack: Supported • Housing: Aluminum housing with plastic panel OS Support • Windows® 2000 /XP/VISTA/7 • Macintosh®: Mac 8.6, 9.X, 10.
Performance and Throughput are influenced by many factors (interference, noise, environments) 36
Atlantis SpA Via S. Antonio, 8/10 20020 Lainate (MI) info@atlantis-land.
