User`s manual

WebShare 340/440
27
Active PC in LAN displays a list of individual Ethernet device’s IP Address & MAC Address
which connecting to the router.
You can easily by checking the box next to the IP address to be blocked or allowed. Then,
Add to insert to the Ethernet Client Filter table. The maximum Ethernet client is 16.
3.6.3.1.4 Port Setting
This section allows you to configure the settings for the router’s Ethernet ports to solve some
of the compatibility problems that may be encountered while connecting to the Internet, as
well allowing users to tweak the performance of their network.
Port # Connection Type: Five options to choose from: Auto, 10M half-duplex, 10M
fullduplex,
100M half-duplex or 100M full-duplex. Sometimes, there are Ethernet compatibility problems
with legacy Ethernet devices, and you can configure different types to solve compatibility
issues. The default is Auto, which users should keep unless there are specific problems with
PCs not being able to access your LAN.