Specifications

48
• WLAN (for Wireless configuration)
Click on the desired item to expand the page with all settings in the main navigation
panel.
Following next steps you can make operating WebShare Wireless Router ADSL2+ in
short time using PCs in DHCP mode. Refer to manual on Installation CD if you need
personalized configuration.
If the
A
DSL Led flashes periodically You have to force
modulation. Click on Advanced, then Configuration-
>WAN->ADSL Mode. On the combo-box Connection
Mode please choose ADSL modulation, then on the combo-
box Modulation please choose the kind of modulation used
by DSLAM then click on Apply and Save Config.
2.1 Single WAN ADSL Configuration
1. Select ADSL from Connect Mode drop-down menu and click Continue.
2. If your ADSL line is not ready, you need to check your ADSL line has been
set or not.
3. If your ADSL line is ready, the screen appears ADSL Line is Ready. Choose
Auto radio button and click Apply. It will automatically scan the
recommended mode for you. Manually mode makes you to set the ADSL
line by manual.