User manual

45
2 Make sure that there is not an console session runnin
g
.
3 Check that you have enabled web service access. If you have
confi
g
ured a secured client IP address, your computer’s IP address
must match it. Refer to the chapter on remote mana
g
ement for
details.
4 For WAN access, you must confi
g
ure remote mana
g
ement to allow
server access from the Wan (or all).
5 Your computer’s and the ADSL Router’s IP addresses must be on the
same subnet for LAN access.
6 If you chan
g
ed the ADSL Router’s LAN IP address, then enter the
new one as the URL.
7 Remove any filters in LAN or WAN that block web service.
8 See also Section A.9.
The web configurator does not display properly.
Steps Corrective Action
1 Make sure you are usin
g
Internet Explorer 5.0 and later versions.
2 Delete the temporary web files and lo
g
in a
g
ain.
In Internet Explorer, click Tools, Internet Options and then click the
Delete Files ... button.
When a Delete Files window displays, select Delete all offline
content and click OK. (Steps may vary dependin
g
on the version of
your Internet browser.)
A.4 Login Username e Password
I forgot my login username and/or password.
Steps Corrective Action
1 If you have chan
g
ed the password and have now for
g
otten it, you
will need to upload the default confi
g
uration file. This will erase all
custom configurations and restore all of the factory defaults
including the password.
2 Press the RESET button for five seconds, and then release it. When
the SYS LED be
g
ins to blink, the defaults have been restored and
the ADSL Router restarts. Or refer to the Resettin
g
the ADSL Router