User manual

32
1.3 The Rear Ports
PORT MEANING
LINE (RJ11)
Connect the supplied RJ-11 cable to this port when
connecting to the ADSL/telephone network.
USB
User can connect to PC using an alternative USB cable
through this port.
LAN (RJ45)
Connect a UTP Ethernet cable (Cat-5 or Cat-5e) to the
Ethernet port when connecting to a PC or an office/home
network of 10Mbps or 100Mbps.
RESET
After the device has turned on, press it to reset the device
or restore to factory default settings. The operation is as
below:
• 0-3 seconds: reset the device
• 3-5 seconds: no action
• 6 seconds or above: restore to factory
default settings (this is used when you can not
login to the router, e.g. forgot the password)
POWER (jack)
Connect the supplied power adapter to this jack.