DiskMaster NASG302D/F301D Dual Bay Gigabit/Fast Network Storage MANUAL A06-NASG(F)302(1)_ME01 Where solutions begin ISO 9001:2000 Certified Company
ITALIANO Questo prodotto è coperto da garanzia Atlantis Land On-Center della durata di 2 anni. Per maggiori dettagli in merito o per accedere alla documentazione completa in Italiano fare riferimento al sito www.atlantis-land.com. ENGLISH This product is covered by Atlantis Land 2 years On-Center warranty. For more detailed informations please refer to the web site www.atlantis-land.com. For more detailed instructions on configuring and using the Switch, please refer to the online manual.
The award of the information is facultative, but its lack will prevent ATLANTIS LAND® from starting the Guarantee process requested. R R g o u p o d u Reeeg giiisssttteeerrr yyyo ou urrr p prrro od du ucccttt!!! w w w w n n d o m ww ww w...aaatttlllaaan ntttiiisss---lllaaan nd d...ccco om m Registration on the web site www.atlantis-land.
DiskMaster INDEX 1.1 An Overview of the DiskMaster ..................................................8 1.2 Package contents .......................................................................9 1.3 Choosing a place for your DiskMaster........................................9 1.4 DiskMaster Application .............................................................10 1.5 The Front LEDs.........................................................................10 1.6 The Rear Ports..............................
DiskMaster A.2 Login: Username and Password............................ 68 A.3 WEB INTERFACE.................................................... 68 A.4 General..................................................................... 69 3.2 Product Support ........................................................................71 APPENDIX APPENDIX A: Technical Features (A06-NASG302D)....................72 APPENDIX B: Technical Features (A06-NASF301D) ....................73 A06-NASG(F)302(1)D_ME01(V1.
DiskMaster Copyright Statement No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, whether electronic, mechanical, photocopying, recording or otherwise without the prior writing of the publisher. Windows™ 98SE/2000/ME/XP/VIsta are trademarks of Microsoft® Corp. Pentium is trademark of Intel. All copyright reserved. The Atlantis Land logo is a registered trademark of Atlantis Land.
DiskMaster Safety Information • Only qualified personnel should carry out technical work on the device. • When cleaning, avoid using cleaning sprays and any kinf of solution containing alcohol or other flammable liquids. • Avoid overheating. This may reduce the life of the device. • Protect your device from humidity, direct sunlight as well as high and extremely low temperatures. • Do no place any liquids on or close to the unit.
DiskMaster Thank you for purchasing the DiskMaster storage solution. With speed, ease of use, high capacity, and support for numerous applications, DiskMaster is the ideal solution for all of your data storage needs. 1.1 An Overview of the DiskMaster Securely access all of your multimedia, music and data files on your local LAN or through Internet.
DiskMaster away with the need to have a computer connected to it, and allowing you to share it with the rest of the users in the office or at home. 1.2 Package contents Unpack the package and check all the items carefully. Also, keep the box and packing materials in case you need to ship the unit in the future.
DiskMaster 1.4 DiskMaster Application When you have completed the steps in this Quick installation Guide, your connected network should look similar to this: 1.5 The Front LEDs The following figures illustrate the connector locations for the DiskMaster. LED MEANING PWR(Blue) Lit when power ON. LINK(Green) Lit when connected to Ethernet device.
DiskMaster ACT(Red) Flashes when sending/receiving data. 1.6 The Rear Ports PORT MEANING 1 Leave at least 10cm of space at the rear of the device for ventilation.
DiskMaster 2 RESET 3 LAN(RJ45) 4 USB(V1.1) 5 POWER (jack) 6 POWER(ON/OFF) After the device has turned on (turn on the power and wait 3 minutes), press and hold reset button for 5 seconds, then release it to reset it (this is used when you can not login to the DiskMaster, e.g. forgot the password. Please use the Ethernet cable to connect the DiskMaster to network. Please use the USB printer cable to connect the device’s USB port (fro printe server). Connect the supplied power adapter to this jack.
DiskMaster 1.8 Hardware Installation Following is a quick installation guide to get you up and running. For further details on each of the settings, please refer to manual on CD. • Release two screws from the back side. • Remove the aluminium plate. • Release the 4 screws in the Hard Disk Mount. • Place the first Hard Disk in to lower mont. • Place the second Hard Disk in the upper area. • Fasten all Hard Disk screws. • For SATA Hard Disk: connect both power cable and data cable in to Hard Disk.
DiskMaster Where solutions begin ISO 9001:2000 Certified Company
DiskMaster Where solutions begin ISO 9001:2000 Certified Company
DiskMaster Dual Interface (SATA I/Il and EIDE) is available only on A06-NASG302D.
DiskMaster 1.9 Hard Disk setup If the hard disks are being installed for the first time, you need to initialize the disks before you can use them. Follow the steps described below. Open the web browser, enter the local port IP address of this DiskMaster, which default at 192.168.1.1, and click Go to get the login page. The default username is admin, password atlantis and click “OK” to continue.
DiskMaster Single Hard Drive installation The following illustrates the layout of the Web-based Configuration Tool main screen. This page allows you to format the physical hard disks into DiskMaster. Click on Maintenance then Disk Utility. Select the mode for the NAS system to partition and format disks. Select, in the combo box, the system file (EXT2 / EXT3 / FAT32), EXT 3 is recommend. Press Format to start formatting (it may require some times; do not perform other jobs during hard drive formatting).
DiskMaster When the settings are made, the DiskMaster system starts formatting the disks. This procedure will destroy all the data on the disks. Make sure You have backed up any important data on the disks before the format process. It may require some times; do not perform other jobs during hard drive formatting The DiskMaster supports 128bit loop-AES encryption for the EXT2 file system.
DiskMaster Dual Hard Drive installation The following illustrates the layout of the Web-based Configuration Tool main screen. This page allows you to format the physical hard disks into DiskMaster. Click on Maintenance then Raid Settings. In this section you can manage the RAID array and set up your drives. The DiskMaster supports RAID 0 and RAID 1. Two hard drives of identical capacity and make are required. Please Select the RAID mode (RAID 0, RAID 1 or JBOD) then Create Raid Systems.
DiskMaster If only one drive is installed, the RAID configuration will not be available. Creating the RAID system will take several hours, depending on HDD capacity. Do not turn off the power or interrupt the system in any other way during this process! We recommend using the EXT2 file system for optimum performance and functionality. Changing the RAID setup will require you to re-format the drives.
DiskMaster disk can operate independently and is seen as an individual disk. Therefore, the total capacity of JBOD is the sum of the capacities of each disk. This allows the user to add disks until the desired total capacity is reached. Since JBOD provides no performance increase and data protection, it is seldom used. 1.10 How to login To configure your DiskMaster , you will need to use the web browser, enter the IP address and then use the web configuration for further setup.
DiskMaster • • Before you can access the device, you will have to enter the admin password. The default login is admin/atlantis, so enter admin for the password and press OK to login. You can define the name (Server Name) for your device and set up the IP configuration. When set, press Next to continue.
DiskMaster • Set time zone, current Date and Time. Click Next.
DiskMaster • you can compare your new settings with the previous configuration. If you find a mistake, go back to make changes but if everything is OK, press Save, then OK. Alternatively, you could also simply write down the IP address in the first step of the setup wizard and then access the web configuration interface via your web browser. Input the IP address in the URL field of your web browser, hit the Enter key, enter admin for the username, once more admin for the password and then login.
DiskMaster • Select Reconnect at Logon. • Then click Finish. Once the drive has been mapped, you are able to find and access it under My Computer. This link will still be there even after rebooting your Operating System.
DiskMaster In event of problem, please write directly the IP (instead of name) in the folder name. Please write: \\IP address\guest-share. Then click Finish. Mapping a Network Drive in Windows Vista • • Start->Computer Click on Map Network Drive. • Follow the setup wizard and fill in the path to your DiskMaster. Alternatively, you can also browse for the shares by clicking on the Browse button and locating the folder that way (choose guest-share folders). • Select Reconnect at Logon then click Finish.
DiskMaster If event of problem , please write directly the IP (instead of name) in the folder name. Please write: \\IP Address\guest-share. Then click Finish.
DiskMaster 2.1 WEB Configuration Open the web browser, enter the local port IP address of this device, which defaults at http://192.168.1.1, and click “Go”, a username and password window will appear. The default username & password are admin & atlantis, in respectively. To configure your DiskMaster, you will need to use the web browser, enter the IP address and then use the web configuration for further setup.
DiskMaster 2.2 Basic The settings in this menu are aimed at the user who wants to quickly set up the DiskMaster and share files on the local network. Only the most basic functions and settings are available but it is ideal for someone first using this device. For a more advanced set up, see Control Panel.
DiskMaster Wizard The setup wizard can be used to configure all the basic LAN settings for your DiskMaster. For PC users, if you have followed the setup wizard previously, there is no need to go through this again unless you want to change some of the settings or have not yet completed the setup. Step 1: Select your preferred language for the web interface from the drop down list. Step 2: Set a new password for the web configuration interface. Not required but strongly recommended.
DiskMaster To avoid languages support issue, you are suggested to create/share folders with English characters only.
DiskMaster Add User Use this setup wizard to quickly add and configure a new user account. Step 1: Enter the user name and password for the new account. At the same time, you can also create a private folder for that user and set the quota limit. Step 2: If there are other users already set up, they can be added to the user account management. Step 3: In the last step you can configure the permissions to the shared folder and add or remove other users.
DiskMaster Add Group Use this setup wizard to quickly add a new group. Step 1: Enter the group name. Step 2: Configure which members will be included in this group by adding and removing the members from the list. Step 3: Configure the share permissions by adding (read only or writable) and removing the shares from the list.
DiskMaster Add Folder Use this setup wizard to quickly add a new share folder. Step 1: Enter the share folder name and an optional description for the share. Step 2: Configure the Windows/FTP access permissions by adding (read only or writable) and removing the members or group from the list. Step 3: Configure the NFS access permissions by adding unique IP addresses or a subnet.
DiskMaster 2.3 Control Panel This menu includes all the settings and information the DiskMaster offers. Sorted into individual categories, the user can access only particular settings or adjust and modify everything manually.
DiskMaster Users and Groups In this menu, the admin can manage the users and groups for the DiskMaster. Start by adding your users first, then create the groups and assign the members to their groups. Click on Users and Group will open all the following subsections: • User Management • Group Management User Management In this section you can see all existing users for the DiskMaster and manage them by adding or removing them from the list. Existing Users: Lists the current users of the DiskMaster.
DiskMaster Modifying Users: Select the user from the existing users list and modify the settings (Groups). Once done, press the Save button to apply the new settings. Removing Users: To remove a user, select it from the existing users list and then press the Delete User button. To add a new user (A06-NASF301D) clear the form by pressing the Clear Form button, then fill out a user name and password.
DiskMaster Add Group In this section you can see all existing groups for the DiskMaster and manage them by adding or removing them from the list. Groups are not required to grant access to the DiskMaster but will help the admin to manage multiple users and easily share a folder among a group of people. Existing Groups: Lists the current groups of the DiskMaster. Adding Groups: To add a new Group, click on AddGroup, use this setup wizard to quickly add a new share folder. • Step 1: Enter the group name.
DiskMaster To add a new group (A06-NASF301D) clear the form by pressing the Clear Form button, then enter a new group name. Once done, press the Save button to create the new group. If you would like to add some members to this group, select the group from the existing groups list and press the Members button for further settings.
DiskMaster File and Print In this menu, you can configure all the settings related to the FTP, NFS and printer server. Use this to manage how your files and folders are shared. Click on File and Print will open all the following subsections: • File Server • Share Management • Printer Server File Server In this section you can modify the server settings and also enable or disable a service. Character set: By default, this is set to English (CP437).
DiskMaster Windows Setting: In this section, you can change the workgroup that the DiskMaster belongs to and modify its description. The IP for the WINS Server (Windows Internet Name Server) can be left blank unless this is required for your network. FTP Server: This service can be enabled or disabled. When enabled, the default FTP port number will be set to 21 but you can change that if required. NFS Server: This service can either be enabled or disabled depending on your requirements.
DiskMaster Share Management In this section you can manage the shares and access rights. Existing Shares: Lists the current shares on the DiskMaster Add Share: Click on Add Share, use this setup wizard to quickly add a new share folder. • Step 1: Enter the share folder name and an optional description for the share. • Step 2: Configure the Windows/FTP access permissions by adding (read only or writable) and removing the members or group from the list.
DiskMaster For A06-NASF301D To add a new share, clear the form by pressing the Clear Form button, then enter a new share name. Once done, press the Save button to create the new group. Select the new group from the existing shares list, then depending on how you share the files, click on Windows, FTP Access or NFS Access and add the users or groups that will have access to this share. You can allow access for all users or define each user and group separately.
DiskMaster Printer Server DiskMaster support most of major brand of printers, user can share printer resource form the network. Simply follow the steps below: Step1. Power on and connect your USB printer in to your DiskMaster. Step2. Browse the Web UI and see whether the printer has been detect the by DiskMaster. Step3. Install your Printer driver in to your computer, (for example. if XYZ Printer is connected to DiskMaster, you must install XYZ driver in to the computer which going to perform the print job.
DiskMaster System In this menu you can configure the basic network settings for the DiskMaster, find some details related to the firmware, disk usage and set up the error notification. Click on System will open all the following subsections: • LAN Settings • Time Settings • Turn OFF Server • Information • Disk Usage LAN Settings In this section you can define the hostname for your DiskMaster and set up the IP configuration. We recommend using the Obtain IP/DNS address automatically.
DiskMaster Time Settings In this section, you can set the date and time manually or select your time zone from the drop down list and use a NTP server to synchronise the time via the internet When set manually, press the Save button to apply the new time and save the settings or when synchronised via the internet, select the NTP server and press the Update Time button.
DiskMaster Turn OFF Server In this section, you can restart the server or turn off the DiskMaster via the web browser. Make sure that nobody is accessing the device when you restart or turn it off. Press the Restart button to restart the server. The system will restart and automatically prompt you for the login when it’s ready. Press the Turn Off button to shut down the system.
DiskMaster Information In this section, you can find the product name, the current firmware and the current IP address.
DiskMaster Disk Usage In this section, you can find a summary of the hard disk status and disk usage. Press the Refresh button to update the information.
DiskMaster Network Service In this menu, you can enable or disable the network services like the DHCP server, Bonjour and the BitTorrent™ download service. Click on Network Service will open all the following subsections: • DHCP Server • Bonjour • BitTorrent DHCP Server In this section, you can enable and set up the DHCP server. In general, there is already a DHCP server on the local network, so you don’t need to enable this but if required, enable it and configure the addresses.
DiskMaster Bonjour In this section, you can enable or disable the Bonjour service. By default, this is enabled, offering easy access to the login page. In addition to that, you can also enable the iTunes service. When the iTunes option is enabled, you can store your MP3 music files in the /public/music folder and play them directly from iTunes. The DiskMaster will automatically appear in iTunes under shared devices.
DiskMaster BitTorrent In this section, you can manage your torrents and add new downloads to the queue. Before you add the first job, set a limit for the download and upload speed according to your network’s bandwidth. After changing the settings, press the Save button to apply the new configuration. To start downloading files, you will have to download a torrent file from the internet first and then upload it to the DiskMaster; using browser to select the torrent in your computer.
DiskMaster Maintenance In this menu, you can format the hard drives, setup the RAID array, upgrade the firmware and manage the configuration settings.
DiskMaster Disk Utility This utility can be used to format the individual hard drives and also to see all the information related to those disks. Disk spin down time: To save power and reduce heat, you can let the hard disk spin down if not used for a certain amount of time. Enter a time in minutes and press the Save button to apply the new setting. Encryption: The DiskMaster supports 128bit loop-AES encryption for the EXT2 file system.
DiskMaster Raid Settings In this section you can manage the RAID array and set up your drives. The DiskMaster supports RAID 0 and RAID 1. Two hard drives of identical capacity and make are required. If only one drive is installed, the RAID configuration will not be available. Two hard drives of identical capacity and make are required for RAID 0/1.
DiskMaster There are 3 differents RAID mode: • RAID 0= RAID 0, known as disk striping, has generally the best performance, but does not offer any redundancy. In this level, data is broken into small units called sectors, and sectors are distributed across all disks in the array. As it does not provide any data protection, if any disk in the array fails then all data in the array is lost. Such stripes allocation allows to enhance I/O performance.
DiskMaster Raid Settings (Rebuilding) When using RAID 1 and one of the drives has failed, the faulty HDD has to be replaced and the RAID 1 array rebuilt. 1. Login and go to the RAID Setting (Maintenance->Raid Settings) menu to check the disk status. If there is a problem, it will show which drive has to be replaced. 2. Turn off the power, remove the power supply from the wall socket and replace the a new HDD. Please refer to the table below for the HDD allocations. 3.
DiskMaster Where solutions begin ISO 9001:2000 Certified Company
DiskMaster Firmware Upgrade In this section you can check the current firmware version and upgrade if a new one is available on the website (www.atlantis-land.com). Download the new firmware and store in on your computer, then browse for the *.gz file, select it and start the upgrade. When the Start Upgrade button is pressed, all users, groups and other configurations will be lost! The upgrade process will take 10-20 minutes. Please contact your dealer for latest Firmware update.
DiskMaster When uploading software to the Router, it is important not to interrupt the Web browser by closing the window or loading a new page. If the browser is interrupted, it may corrupt the software. In order to achieve a succesfull upgrade please uninstall or remove the Hard Disk drive from the NAS before upgrading firmware.
DiskMaster Save Configuration For backup and before every firmware upgrade, you can use this function to save your current configuration. Press the Save button and save the config.tar file on your computer.
DiskMaster Restore Configuration To quickly restore previous settings or set up multiple units, you can save the configuration and then use this function to upload a previous backup. Browse for the config.tar file on your computer and press the Restore button to restore the previous settings.
DiskMaster Factory Reset Pressing the “Factory Reset” button will restore all settings to their default configuration. Before pressing this button, we recommend saving your current configuration (Save Configuration) in case you want to restore it again later.
DiskMaster Log File This menu includes all the log files of yourDiskMaster . You can find logs for the SAMBA, FTP and DHCP server as well as system and administration logs.
DiskMaster 2.4 Personal Info This menu is for the system administrator account. It includes the option to set the password and some other options related to the web interface. 2.5 Logout This can be used to logout once all the settings have been configured. Without installing and formatting a drive first, several functions will not be available (example: User&Group Management, BitTorrent download).
DiskMaster 3.1 Troubleshooting This chapter covers potential problems and the corresponding remedies. A.1 Using LEDs to Diagnose Problems The LEDs are useful aides for finding possible problem causes. A.1.1 Power LED The PWR LED on the front panel does not light up. Steps Corrective Action Make sure that the DiskMaster’s power adaptor is connected 1 to the device and plugged in to an appropriate power source. Use only the supplied power adaptor.
DiskMaster A.2 Login: Username and Password I forgot my login username and/or password. Steps 1 2 3 Corrective Action If you have changed the password and have now forgotten it, you will need to upload the default configuration file. This will erase all custom configurations and restore all of the factory defaults including the password.
DiskMaster 4 Reset the device. A.4 General Why Can’t I perform RAID function under FAT32 format? Steps Corrective Action FAT32 format doesn’t support RAID functions. 1 To perform RAID functions please use EXT2 or EXT3 format. 2 Some of the functions and menus are not available! Steps Corrective Action Many of the functions require a hard drive to be installed. 1 Make sure you have at least one HDD installed and formatted in EXT2 or EXT3.
DiskMaster Does the NAS support Hard disk Power Management? Steps Corrective Action The NAS uses standby mode for power management (Sleep 1 time), if there is no any activity ranging 5-60 min. You can go to web base > Disk Utility > Set Sleep Time function (0 to disable function, range 5-60 to enable function.
DiskMaster 3.2 Product Support If you have any problems with the DiskMaster, please contact the dealer where you bought this product. If you have any other questions you can contact the Atlantis Land company directly at the following address: Atlantis Land Via Pelizza da Volpedo, 59 20092 Cinisello Balsamo (MI) Italy Fax: +39.(0)2.93906161 Help Desk :+39.(0)2.93907634 Email: tecnici@atlantis-land.com WWW: www.atlantis-land.
APPENDIX A APPENDIX A: Technical Features (A06-NASG302D) Protocols LAN port USB A Port LED Indicators Hard Disk Supported System Format: CPU Sharing Protocol Advanced Features External buttons Input Power Power Consumption Agency and Regulatory Dimensions Weight Operating Temperature Storage Temperature Operating Humidity IP, NBNS(“NetBios” Name Server), Microsoft Networks (CIFS/SMB), DHCP Server/Client, SNTP Client, NTP 1 x RJ45 10/100/1000 Base-T port USB V1.
APPENDIX B APPENDIX B: Technical Features (A06-NASF301D) Protocols LAN port USB A Port LED Indicators Hard Disk Supported System Format: CPU Sharing Protocol Advanced Features External buttons Input Power Power Consumption Agency and Regulatory Dimensions Weight Operating Temperature Storage Temperature Operating Humidity IP, NBNS(“NetBios” Name Server), Microsoft Networks (CIFS/SMB), DHCP Server/Client, SNTP Client, NTP 1 x RJ45 10/100/ Base-T port USB V1.
Atlantis Land Via Pelizza da Volpedo, 59 20092 Cinisello Balsamo – MI – Italy info@atlantis-land.
