Installation guide

ENGLISH
DiskMaster 48
Allow system file EXT2 / EXT3 or FAT32.
Dual Hard Drive installation
The following illustrates the layout of the Web-based Configuration Tool
main screen. This page allows you to format the physical hard disks into
DiskMaster. Click on DiskTools ( ) then Raid Settings.
In this section you can manage the RAID array and set up your drives. The
DiskMaster supports RAID 0 and RAID 1. Two hard drives of identical
capacity and make are required.
Please Select the RAID mode (RAID 0, RAID 1 or JBOD) then Create
Raid Systems.
If only one drive is installed, the RAID configuration will not
be available.