High Performance C.O.R.E.
Table of Contents System 8200/System 6200 High Performance Loudspeakers Table of Contents 2 2 2 3 3 3 4 4 4 C.O.R.E.
Individual Component Descriptions Instruction Manual NOTE: You may notice some very small holes along the sides of the LR and Center speakers. These are pilot holes for the screws that hold on the optional Accent Panel Kit hardware. They may be ignored, as they have no impact on the performance of the systems. If you are installing the accent Panel Kits please follow the directions included with those kits. You may also notice 4 larger holes in the bottom of the LR satellites.
Placement System 8200/System 6200 High Performance Loudspeakers Acoustic Controls Home Theater System 8200 and 6200’s LR speakers include unique acoustic controls to help maximize their performance in your room. These controls are explained in greater detail on page 9. Remember that the primary goal of a good home theater is not to make you believe that you are in a movie theater. It’s to make you believe you’re in the movie.
Speaker Placement Instruction Manual Speaker Placement ����� ������� ����� ������ �� ������ �� ����� �� ��� ����� �� ��������� ���������� ��� ������� ���� ��� �������� ��� ���� ��� ������ ��� ������ ���� ���� ������ ���� �������� �������� ������ �� ������ �������� �� ��� ����� �� ��� ������� ���� ��� ������������� � ���� �� ������ ����� ��� ���������� ��� ������ ���� �������� ���� �������� ���� ������ ����� ��������� ��������� �� ��������� �� ���� ���� ��� ������ ���������� �� ���� � �������� ����
Connecting Your System System 8200/System 6200 High Performance Loudspeakers There are dedicated LEFT and RIGHT model 8200 SR and 6200 SR speakers. This is clearly marked on the back of each speaker. Normally, be sure that the Left side surround speaker is placed directly to the left side of the prime listening area (facing the screen) and the Right speaker is directly to the right side. As an easy reference, the Dipole/Bipole switch should always be facing the back of the room.
System Wiring Without Using Bi-Wire Option Instruction Manual System Wiring Without Using Bi-Wire Option HF LF HF HF LF LF LEFT RIGHT SURROUND SURROUND + + – LEFT + – CENTER + – RIGHT – + – 7
System Wiring Using Bi-Wire Option System 8200/System 6200 High Performance Loudspeakers System Wiring Using Bi-Wire Option HF LF HF HF LF LF LEFT RIGHT SURROUND SURROUND + + – LEFT + – CENTER + – RIGHT – + –
System Setup 9 Instruction Manual The terminals themselves are designed to allow the use of very heavy speaker wire or connectors. Be sure to tighten them securely, but don’t over-tighten them. WARNING: To prevent risk of electrical shock or damage to your equipment, always switch off the amplifier or receiver when making any system connections. You can connect your speakers by using a variety of audio connectors such as banana plugs (single or double), pin connectors, spade lugs, etc., or you can: 1.
Mounting System 8200/System 6200 High Performance Loudspeakers Dipole/Bipole Operation of the SR Speakers Mounting In Dipole mode the 8200 SR and 6200 SR produce ambience with minimal localization ������ ������ (best for most movies and video soundtracks) and more localizable sound in the Bipole mode (preferred for some music recordings). Switching between Dipole and Bipole mode is easily accomplished using a toggle switch conveniently located under one of the speaker’s grilles.
Specifications Instruction Manual Specifications System 8200 Model 8200 LR 8200 C 8200 SR Type Sealed-box, 3-way Sealed-box, 3-way Sealed-box, 2-way Dipole/Bipole surround speaker (2) 8" GLH (2) 5.25" GLH (1) 1" silk dome (2) 8" GLH (2) 5.
Atlantic Atlantic Technology ® ® IN N O V A T I V E H O M E T H E A T E R 343 Vanderbilt Avenue Norwood, MA 02062 (781) 762-6300 www.atlantictechnology.
