IWCB-52, IWCB-525 & IWCB-626 In Wall Closed Box Speakers IWCB-52 IWCB-525 IWCB-626 Instruction Manual IWCB Series
Safety Precautions IWCB Series In-Wall Closed Box Speakers Table of Contents 2 Model IWCB-52, -525, -626 3 Important Considerations Before Installation 3 3 3 Recommended Wire Sizes Location Considerations Room Acoustics 3 4 Stereo Music Listening Home Theater Systems 5 5 6 6 6 6 Removing and Installing the Grille Cutting the Opening Installing the Mounting Frame Painting the Speaker Assembly Speaker Connection and Assembly Installing the Speaker Enclosure Into the Frame 7 7 7 7 HF (High Frequenc
Speaker Placement 3 Instruction Manual Important Considerations Before Installation Recommended Wire Sizes The longer the wire run, the heavier the wire should be. Use the following recommendations as a guide for your installation. And if you’re in doubt, remember that it never hurts to get the next heavier grade of wire. Also note that lower gauge numbers equal heavier wire sizes.
Home Theater Placement IWCB Series In-Wall Closed Box Speakers Home Theater Systems ������������������������������ �������������������������������� ��������� ������ ���� ����������������������� ������������������� ����������������������� �������������������������� ������������������ ����������������������� ������������������������� ������ ����� ������ �������� �� ����� ������� �������� ����� ��������� ����� ������ �������� �� ����� ������� �������� ���������������������������������� ������������
Installation 5 Instruction Manual Mounting the IWCB Speakers NOTE: We always recommend a professional be involved in the installation of IWCB speakers. The IWCB speaker can be easily mounted in most any standard wall material, from ½ to 1½ inches thick. Its rotating wall clamps firmly fix it to the wall surface after the proper cutout has been made.
Installation IWCB Series In-Wall Closed Box Speakers Installing the Mounting Frame Speaker Connection and Assembly The clamping mechanism allows the wall material to range from ½ to 1½ inches (13 to 38 mm) in thickness. There must be a minimum depth behind the wall face of 3 5⁄8” (92 mm). As noted above, be sure to keep the edges of the cutout at least ½ inch (13 mm) away from any stud or obstruction, as the rotating clamps will not operate properly if you don’t.
Front Panel Controls 7 Instruction Manual Front Panel Controls The IWCB speakers have three controls that help optimize the speaker’s performance regardless of mounting location or room acoustics. If it’s necessary to mount the speaker closer than 12 inches to the ceiling or corner, you may find that by switching the Boundary Compensation control “on,” the speaker sounds better. We recommend that you try the control in both positions and see if it helps in your particular installation.
343 Vanderbilt Avenue Norwood, MA 02062 (781) 762-6300 www.atlantictechnology.
