Instruction manual

44
P-2000 7.1 Channel Preamp/Processor/Tuner
Instruction Manual
45
Care and Maintenance
CD
Manufacturer/Brand Setup Code Number
ADCOM 062
AIWA 187 170 089
AKAI 202
AUDIO TECHNICA 046
CARVER 167 041 135 138 139 050 203
DENON 205 226
FISHER 016
H/K 047 033 208 046
JVC 136 163 004
KENWOOD 007 055 023 137 016
MARANTZ 044 041
MONDIAL 147
NAD 215 005 178
NAKAMICHI 218
NIKKO 046
ONKYO 038 168 030 062 169
PANASONIC 068 172
PHILIPS 041
PIONEER 010 020 174
RCA 017 021
REALISTIC 187
SANSUI 171
SHARP 051 173
SHERWOOD 001 166 096 051
SONY 225 097 126 133
TEAC 079 140
TECHNICS 068 008 172
VICTOR 004
YAMAHA 012 186 183 046
Care and Maintenance
Cleaning
If the unit becomes dirty, wipe it with a clean, soft, dry cloth. If necessary, rst
wipe the surface with a soft cloth slightly dampened with mild soapy water,
then with a fresh cloth dampened with clean water. Wipe dry immediately
with a dry cloth. NEVER use benzene, thinner, alcohol or any other volatile
cleaning agent. Do not use abrasive cleaners, as they can damage the nish
of the metal parts. Avoid spraying insecticides, waxes, polishing agents, or
any aerosol product near the unit.
When You Are Away
If you will not be using your system for an extended period of time, it is
always a good idea to turn the unit off using the Power Switch on the rear
panel of the P-2000. This will prevent the automatic turn on circuits from
accidentally turning the system on during your absence.
Troubleshooting
Your new P-2000 is designed to provide years of trouble free operation.
However, the complexity of today’s sophisticated surround sound sys-
tems means that you might encounter an occasional problem with your
system involving the P-2000. Listed below are some of the more common
issues you could encounter. For additional hints on using the P-2000 or
resolving problems we suggest that you please contact us via e-mail at
customer [e-mail] , or call us at 781-762-6300.