Specifications

NEW!
TRANSDUCERS
1430
NEW!
TRANSDUCERS
23
WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE.
kele.com888-397-5353 USA
March 2014
Supply Voltage 24 VAC/VDC
Supply VA 1 VA @ 24 VAC; 50 mA @ 24 VDC
Input 1-5 VDC, 2-10 VDC, or 4-20 mA
Input Impedance 100 kΩ @ 1-5 VDC; 200 kΩ @
2-10 VDC; 250Ω @ 4-20 mA
Wiring Terminations Screw terminals
Air Capacity 200 scim (55 mL/s)
Air Connections 3/16" diameter barbs for 1/4" OD
tubing; 1/8" FNPT gauge port
Air Consumption 28.8 scim (7.9 mL/s) @ 20 psig
(138 kPa) supply
Maximum Pressure 30 psig (207 kPa)
Linearity 1% of full scale
Hysteresis 0.75% full scale
Output 3-15 psig (21-103 kPa)
Operating Temperature 40° to 120°F (4° to 49°C)
Operating Humidity 10 to 90% RH (non-condensing)
Weight 5.5 oz (155 g)
Warranty 1 year
24V
2-10V
1.5V
4-20
mA
GND
1-5V
0.875
(2.2)
3.375
(8.6)
0.875
(2.2)
2.75
(6.9)
2.53
(6.4)
IN GNDOut
in
(cm)
DESCRIPTION
The KMC Controls IP300 Electronic / Pneumatic
Transducer converts an analog voltage or current input
signal into a linear pneumatic output signal of 3 to 15 psig.
The pneumatic output provides accurate positioning of
dampers and valve actuators used in HVAC systems. The
IP300 features three selectable inputs of 1-5 VDC, 2-10 VDC,
or 4-20 mA. The unit can be mounted in any orientation with
the 3.25" snap track. The transducer is equipped with an
internal filter and a gauge tap for pressure output indication.
FEATURES
• Three user-selectable inputs
• 24 VAC or VDC power supply
• Gauge tap for pressure output indication
• Zero and span adjustment
• Snap track mounting
DIMENSIONS / WIRING
ELECTRONIC / PNEUMATIC TRANSDUCER
IP300
SPECIFICATIONS
ORDERING INFORMATION
MODEL DESCRIPTION
IP300 Electronic/pneumatic transducer from KMC
IP300
RELATED PRODUCTS PAGE
PG-05 Pressure gauge, 0-30 psig (10-200 kPa), 1.5" dial, 1/8" NPT center back mount 1111