User manual

ATL Berkshire 5000 User Manual, Release 2.2.1
36
4.7 Call Blocking
4.7.1 Blocking a Set of Phone Numbers to be dialed out
Call blocking disallows a set of phone numbers to be dialed out. The blocking number patterns
can only be configured on the web interface. (For details of call blocking configuration, refer to
Section 7.4 “Call Blocking”.)
If the caller dials a number which is blocked by the phone, the following screen will be shown:
N o t a l l o w e d
On the other hand, a key code can be inputted before the destination number to unblock the
outgoing call. The key code can be set on the web interface.
For example, if phone number 2000 is blocked and you set “*173*” to be the key code, you can
still place a call to 2000 without blocking by dialing “*173*2000”.
4.7.2 Blocking Non-speed Dial Outgoing Calls
The Blocking Non-speed Dial Outgoing Calls feature allows the phone to prevent the user from
making Non-Speed Dial Outgoing Calls. By default, this feature is disabled.
If this feature is enabled, a caller is only allowed to make calls with the speed dial buttons, while
the keypad buttons 0 - 9, * and # will be disabled.
This feature can only be disabled or enabled from the web administration page (for security
reasons).
4.8 Call History
The phone can store the last 30 missed calls, dialed calls and received calls in the call history.
Each record contains the phone number and the calling date and time.
To view the call history, follow these steps:
1. Press the “Menu / Delete” button to enter the phone menu.
2. Scroll down and enter “Call History”.
2 > C a l l H i s t o r y
3 C a l l F e a t u r e s ↓