User manual

ATL Berkshire 5000 User Manual, Release 2.2.1
30
4.4 3-way Conferencing
The phone supports 3-way conferencing with two other parties. To start conferencing, follow
these steps:
1. Set up a call first and a screen will be shown as below:
C o n n e c t e d t o
2 0 0 0
2. Press the ‘Line1/Hold’ key to hold the call. The ‘Line1/Hold’ LED will then flash. The
following screen will also be shown:
C a l l o n h o l d w i t h
2 0 0 0
3. Press the ‘Line2/Hold’ key to place another call. The following screen will be shown:
C o n n e c t e d t o
3 0 0 0
4. Press Function > 3-way (keypad ‘1’) to bridge two calls. The conferencing call has now
been set up. The phone number on each line will be shown as below (‘*’ indicates the line is
active):
1 - * 2 0 0 0
2 - * 3 0 0 0
5. End the conferencing call by terminating any one of the lines.
If you would like to hold the conferencing call, follow these steps:
1. Press the ‘Line1/Hold’ or ‘Line2/Hold’ key. The following screen will be shown (‘O’
indicates the line is held):
1 - O 2 0 00
2 - O 3 0 00