User manual

ATL Berkshire 5000 User Manual, Release 2.2.1

4 > C a l l

aiting

5 D o N o t D i s t u r b

4. Enter “Use Call Waiting”.

1 > U s e C a l l W a i t i n g

2 C a l l W a i t i n g D u r

5. Select “Enable” to enable call waiting.

1 > E n a b l e

2 - D i s a b l e

4.2.2 To answer Call Waiting

After call waiting is enabled, if you are engaged in an active call and a new call comes in, the call

waiting feature will be triggered. You can follow these steps to answer the new incoming call:

1. If you are engaged in Line 1 (or Line 2) and a new call comes in (e.g. from 3000), you will

hear continual tones and the LED of the line with new incoming call will flash. The caller

ID of incoming call will also be shown on the screen periodically as below:

I n c o

i n g c a l l f r o

L 2 : 3 0 00

2. To answer the call, you can press the line button of the incoming call Line2/Hold (or

Line1/Hold). The active call will then be held and the LED of the held line will flash. The

LED of the active line will be also on. The screen will show the caller ID of the new

incoming call:

C o n n e c t e d t o

3 0 0 0