User manual

ATL Berkshire 5000 User Manual, Release 2.2.1
20
3.1.1.2 On-hook predialing screen
1. When the phone is on hook, press the number “1” to “9”, “*” or “#” to enter the
predialing screen like this:
E n t e r n u
m
ber N
_
2. Enter the phone number (e.g. 2000), SIP URI (e.g. 2000@1.2.3.4) or IP address (e.g.
123.123.123.123). The maximum number of characters allowed is 60. You could toggle
the input method to “A” using the “#” key.
E n t e r n u
m
ber N
2 0 0 0 _
3. Pick up the handset, press the “Handsfree” button, press “Line1/Hold” or press the
‘OK’ button to use the speakerphone. The “Line1/Hold” LED will be turned on. The
phone will start calling the number. The calling screen will be shown as below:
C a l l i n g 2 0 0 0 . . .
4. If the callee receives the call, a ring-back tone will be heard. After the callee answers
the call, the following screen will be shown:
C o n n e c t e d t o
2 0 0 0
3.1.2 Dialing a Call from Call History
The phone numbers of the last 30 missed calls, dialed calls and received calls are saved in the call
history. You can dial a call from the call history.
To dial a call from the call history:
1. Press “Menu / Delete” button to enter the phone menu.
2. Scroll up/down to ‘Call History’ as shown below: