User manual

ATL Berkshire 5000 User Manual, Release 2.2.1
17
R e g i s t r a r P o r t
5 0 6 0 _
22. The default registrar port number is 5060. Change it if necessary. If the setting is confirmed
and saved, you will be asked to set the outbound SIP proxy:
S e t O u t boundProxy?
1 = Y e s, 2 = No
23. Press 1 if you would like to set the outbound proxy. The proxy host screen will then be
shown. Otherwise, press 2 to skip this configuration and jump to Step 23. (If skipped, the
Domain setting will be used to resolve the outbound proxy.)
P r o x y H o s t
H
_
24. Change the proxy host if necessary. If the setting is confirmed and saved, you will be asked
to input the proxy port:
P r o x y P o r t
5 0 6 0 _
25. The default proxy port number is 5060. Change it if necessary. If the setting is confirmed
and saved, the ending screen will then be shown:
E a s y s e t up e nde d!
26. You have finished the phone setup. After a moment, the standby screen will be shown.
Check the phone icon on the top-left corner of the screen. If the screen shows a normal
phone icon
as below, it indicates that the phone has registered to the SIP server
successfully. You can now start to make or receive calls. Refer to Section 3 for the details
of basic operations.
1 0 0 0 A l i c e A u