User manual

ATL Berkshire 5000 User Manual, Release 2.2.1

2. INSTALLATION & EASY SETUP

2.1 Phone Installation

Follow the steps below to install the phone.

Step 1: Unpack the ATL Berkshire 5000 telephone carton.

The phone package should contain the following components:

1. IP Telephone

2. Handset

3. Power Adapter

4. Ethernet Cable

5. Handset Cord

Step 2: Handset Connection

Connect the handset to the phone body with the handset cord.

Step 3: Network Connection

Connect the phone to a hub or switch with the Ethernet cable through the uplink port “ LAN”. A

desktop or notebook, if any, can be connected to the network through the “PC” port in the phone.

Step 4: Power Connection

Connect one end of the AC to DC adapter to the power jack of the SIP phone. Plug the power

socket converter into the power outlet if necessary. Then connect the other end of adapter to the

converter.

Step 5: Booting Up

After the power is connected, the phone will boot up automatically. The following screen will be

shown on the LCD:

P h o n e s t a r t i n g . .

After booting up, the phone will enter the Easy Setup wizard and the following screen will be

displayed on the phone. (If Easy Setup wizard does not start, it can be triggered by pressing the

‘Menu / Delete’ button and selecting Settings > Easy Setup.)